6 speed manual will not shift into reverse or low
#1
09-02-2010, 03:20 PM
Join Date: Sep 2010
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
#3
09-02-2010, 04:03 PM
#4
09-02-2010, 04:14 PM
Join Date: Sep 2010
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
#5
09-02-2010, 04:16 PM
Join Date: Sep 2010
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
#7
09-02-2010, 04:23 PM
Cargo Master
Trending Topics
#8
09-02-2010, 04:56 PM
Join Date: Sep 2010
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
#10
09-03-2010, 09:27 AM
#11
09-03-2010, 09:31 AM
As far as I can tell, both reverse and low have some level of synchronizers. They don't seem to work as well as the synchro's on the other gears, however. It's a lot more difficult getting the tranny in reverse and low than it is other gears. Especially when it's cold.
That's just my experience.
Edit: Yes, according to the parts explosion diagram, Reverse-Low is synchronized.
That's just my experience.
Edit: Yes, according to the parts explosion diagram, Reverse-Low is synchronized.
#12
09-03-2010, 09:46 AM
Join Date: Sep 2010
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
#14
09-03-2010, 12:39 PM
It is not a clutch issue.
I would suspect an issue with the linkage or transmission. Im not sure but i believe the shifter enters the transmissin from the top so it is either the stick is binding internally or an issue with the shift collar. You may need to have the tranny removed.
Not sure on the older trucks but i know the newer trucks Low gear is non syncronized.
I would suspect an issue with the linkage or transmission. Im not sure but i believe the shifter enters the transmissin from the top so it is either the stick is binding internally or an issue with the shift collar. You may need to have the tranny removed.
Not sure on the older trucks but i know the newer trucks Low gear is non syncronized.
#15
09-03-2010, 01:56 PM
Cargo Master
