here they are.. 85 bronco and 93 F150 Shortbed.. i'll start with the bronco, since i had that first..

85 Bronco, factory 4.9/C6. Motor was replaced with a worked 302 after the I6 blew up. it had coil springs out of an E250 and leafs out of an F250, giving it (roughly) a 4" lift. it had 35x12.50 Dunlop Mud Rovers on it for a little while, until i traded them for a set of 38x12.50 TSL's.













93 F150, factory 2wd truck, was converted with all 83 F150 IFS junk and a skyjacker 6" lift and 3" body lift. frame was cracked where the radius arm brackets bolted up, so i flattened it all out about welded a 3/16" plate onto the frame. the final touch was some fresh paint and 39.5x15 TSL's

 

Nice trucks, so if they are old projects, does that mean you have sold them?

 

lets just say unwillingly gone.. and i'll leave it at that.. lol sore subject