A few years in the making
#1
A few years in the making
Finally got my 79 f-250 4x4 with a 400 out of the 14's, and ran a 13.806 last night at Bandimere. A little carb work, and i see lower 13's.... The carb work, different slicks, and freshen the transmission (slushbucket) and maybe ill hit my goal of gettin the heavy mother into the 12 second range!!!
#3
Miles, when are you going to come out and run on the Mountain??
IM planning on running Pueblo and Julesburg this season, Not sure if ill make it to Douglas, but Im planning on the division finals out in Topeka!!
I am to the point where i am analyzing my inconsistency by the thousandths of a second, instead of the tenths... I think i found a magic combo.
IM planning on running Pueblo and Julesburg this season, Not sure if ill make it to Douglas, but Im planning on the division finals out in Topeka!!
I am to the point where i am analyzing my inconsistency by the thousandths of a second, instead of the tenths... I think i found a magic combo.
#4
I don't think we are going to make Bandimere this year. We were planning every Sunday at Douglas, Julesburg on the Fourth of July weekend and Topeka in August. Sounds like you r truck is running good. Its nice when you run a XX.55, XX.57, and XX.56. Sure makes dialing in a lot easier. I usually break out when that happens though.
#5
Thread
Thread Starter
Forum
Replies
Last Post
79custom4x4
1973 - 1979 F-100 & Larger F-Series Trucks
4
01-13-2009 02:33 PM
robertbourque
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
15
04-20-2007 11:58 AM
workin hard
Fuel Injection, Carburetion & Fuel System
26
11-12-2003 12:25 AM