dash code e 08 6

Reply Subscribe

Thread Tools

Search this Thread

02-06-2010, 12:16 AM

koldhearted1

New User

Thread Starter

Join Date: May 2008

Location: Boise ID

Posts: 6

Likes: 0

Received 0 Likes on 0 Posts

dash code e 08 6

dash code is showing up on my odometer anyone have any ideas what i need to do to fix it? speedo needle sweeps at first turn of key then nothing after that bout all i can tell you.

Reply Like

04-23-2010, 02:27 PM

Cowboy350

Junior User

Join Date: Mar 2005

Location: Clayton, California

Posts: 92

Likes: 0

Received 0 Likes on 0 Posts

Did you ever figure out what the problem was. I have the same thing going on. Thanks.

Reply Like

04-23-2010, 02:29 PM

koldhearted1

New User

Thread Starter

Join Date: May 2008

Location: Boise ID

Posts: 6

Likes: 0

Received 0 Likes on 0 Posts

nope not a clue other than the speed sensor in the trans might be bad

Reply Like

04-23-2010, 04:29 PM

darthice

Elder User

Join Date: Mar 2009

Posts: 769

Likes: 0

Received 3 Likes on 3 Posts

check the connector under the dash on the passenger side to see if the wire is grounded out it is going into programming mode

Reply Like

04-23-2010, 04:49 PM

koldhearted1

New User

Thread Starter

Join Date: May 2008

Location: Boise ID

Posts: 6

Likes: 0

Received 0 Likes on 0 Posts

darthice thanks for the response ill check that out glad someone else had the problem to bring the thread back up the board. if it is in programming mode how do you get it out?

Reply Like