TN October Chat and othe B/S
#2
#7
Trending Topics
#10
Haha, got my hands full with it lately, I've pulled the three person bench seat that resides over the axle, put in one from a converson van, folds down into a bed. I have to replace the box I made to go over the rear battery cause it's keeping the bench from sliding into place on the passenger side. Tossed the speaker box that I has in the rear for the 6 years I've had the van, had another one built for the 2 HE2 12's, waiting on the one for the RFR 1415 to sit on top of it, they sit far enough to the rear that the bed should fully fold out, previous one wouldn't. Tonight I spent laying in the floor rerunning wire for the amps, installing them under the seat, need to tie them up and get loom to cover them over to make it neat. I have 2 decorated 1"x6"x6' boards drilled with 20 1 1/8" holes in each board, LED pods containing 2 blue LEDs in each hole, running down the ceiling of the van one on each side of the van. The factory ceiling lights have blue LED replacements where the bulbs were, the dash lighting is soon to be swapped with blue LEDS, and a white overlay for the gauges. I've drilled the head lamp and the back up housings then installed blue LEDs, haven't wired them up yet, thinking of putting them on a flasher relay to mimic strobes, going side to side.
Its had a pushbar for a while, I put PIAA dual beam road ralley lights on it, some small driving lights under the valance up front. Lund sunvisor above the windshield, painted to match the van. First thing I did was put the black American Racing Wheels on it and Flowmaster 40 si/do exhaust, last year I upgraded to SS 24" x 4" exhaust tips, chome ones rusted. Has the Superchip Microtuner installed, that combined with the exhaust and now unrestricted intake has been rough on my tires. The side doors have Brawn power motors in them, then the worn out Crow River wheelchair lift inside the door, I have a Ricon 6 way power seat base under the drivers seat.
I hope to get things situated in the rear once everything is in, so I can start a cabinet off to the passenger side, the speakers are slid toward the other side, firing at the back door. I want to lay over 1/4" oak plywood over the speaker arrangement to blend it all in, sealed and trimmed in stained hardwood. I have the battery to hide in the rear, I'd like to move it over a little to optimize room and keep it neat.
My van is a daily driver, the only vehicle I own, so can't be down for a day.
Its had a pushbar for a while, I put PIAA dual beam road ralley lights on it, some small driving lights under the valance up front. Lund sunvisor above the windshield, painted to match the van. First thing I did was put the black American Racing Wheels on it and Flowmaster 40 si/do exhaust, last year I upgraded to SS 24" x 4" exhaust tips, chome ones rusted. Has the Superchip Microtuner installed, that combined with the exhaust and now unrestricted intake has been rough on my tires. The side doors have Brawn power motors in them, then the worn out Crow River wheelchair lift inside the door, I have a Ricon 6 way power seat base under the drivers seat.
I hope to get things situated in the rear once everything is in, so I can start a cabinet off to the passenger side, the speakers are slid toward the other side, firing at the back door. I want to lay over 1/4" oak plywood over the speaker arrangement to blend it all in, sealed and trimmed in stained hardwood. I have the battery to hide in the rear, I'd like to move it over a little to optimize room and keep it neat.
My van is a daily driver, the only vehicle I own, so can't be down for a day.
#12
That looks like a great group. Where was this taken? I see that you are in Mt Juliet. I live right next to Long Hunter State park, so we're not far apart. Do you ever venture out to Sonic at Providence on Saturdays for the car shows? I may head up there tomorrow.
#14
The rear one is almost current, the seat is turned around and almost in place, I did that when I got home, was surprised how easy it was for me to do that.
The seat raises, turns and moves forward and back, so I can transfer from my wheelchair to it and spin around to go back under the steering wheel. OK linking from facebook is not working, have to upload some later.
Last edited by maples01; 10-09-2009 at 11:11 PM. Reason: pictures not showing