how do i identify rear axle?
#1
how do i identify rear axle?
okay, (forgive me, i'm new to this)
i have a 96 F250 reg cab 4x4 HD 351 5 speed ZF... i believe it has 3.55 gears (inside door says C9 which = 3.55)
tag on axle says: (i think, its kindof hard to read)
S 128 M
3L55 10 2 6C12
when looking at axle from under/behind truck, to the upper right and lower right of dif cover says "6065"... lower left says "A" (in a circle) and 10 - the "10" is big... upper left i cant make out...
when looking at the axle from under/middle of truck this is punched/embossed: E7TW-AA in lower right of dif...
inside door tag reads:
03/96 GVWR/PNBV: 8600LBS/3900KG
FRONT GAWR / REAR GAWR
PNBE AV PNBE AR
3559LB 6084LB
1614KG 2759KG
**********BUNCH OF TIRE JARGON*********
VIN: 2FTHF26H6TCA49291 |F0190
TYPE: TRUE / CAM |T1617
******************BARCODE******************
YO B6
EXT PAINT RC | D50
WB|BRK|INT TR|TP/PS|R|AXLE|TR|SPR
133 B 7V4 C9 W 64F
MADE IN CANADA CCT
thanks for any help, muchly appreciated
i have a 96 F250 reg cab 4x4 HD 351 5 speed ZF... i believe it has 3.55 gears (inside door says C9 which = 3.55)
tag on axle says: (i think, its kindof hard to read)
S 128 M
3L55 10 2 6C12
when looking at axle from under/behind truck, to the upper right and lower right of dif cover says "6065"... lower left says "A" (in a circle) and 10 - the "10" is big... upper left i cant make out...
when looking at the axle from under/middle of truck this is punched/embossed: E7TW-AA in lower right of dif...
inside door tag reads:
03/96 GVWR/PNBV: 8600LBS/3900KG
FRONT GAWR / REAR GAWR
PNBE AV PNBE AR
3559LB 6084LB
1614KG 2759KG
**********BUNCH OF TIRE JARGON*********
VIN: 2FTHF26H6TCA49291 |F0190
TYPE: TRUE / CAM |T1617
******************BARCODE******************
YO B6
EXT PAINT RC | D50
WB|BRK|INT TR|TP/PS|R|AXLE|TR|SPR
133 B 7V4 C9 W 64F
MADE IN CANADA CCT
thanks for any help, muchly appreciated
#2
how do i identify rear axle?
oh ya, the reason i ask is because i want to buy this dana 60 front axle from a local auto wreckers (he says its out of a F350, i dunno which year yet, only talked on the phone - just in the first stages of finding a front axle) so i can get rid of my ttb ifs and install a solid front axle... i am hoping to buy this dana 60 (has 4.10 gears) and buy new 4.10 gears for my current rear end.. - i currently have 3.55 but when i throw on 35's i'll want lower gears anyways
but i am wondering if the dana 60 will be wider? like from wheel to wheel... i know i can cut off my lug bolts and buy spacers but i'd rather not...
if this dana 60 is out of a 92-96 F350, it should be the same width as my current axle right?
thanks a lot.
but i am wondering if the dana 60 will be wider? like from wheel to wheel... i know i can cut off my lug bolts and buy spacers but i'd rather not...
if this dana 60 is out of a 92-96 F350, it should be the same width as my current axle right?
thanks a lot.
#3
#4
how do i identify rear axle?
I don't know if anyone has told you but the tag on your rear end is the best chance of getting the right information on your axle. I just went through all this with my Ranger and went nuts trying to get a straight answer until I crawled under there with the local parts man from the Ford dealer and he told me what the numbers mean. On yours the top number is the lot (mfg.) number and means nothing to you unless there is a recall on that particular lot. The lower number is the important one for us and it says 3L55 10 2 6C12. Ok the first part says that you have a 3.55 ratio, The L says that there is a Traction-Loc carrier installed (limited slip) and the 10 2 says that you have a 10.25" ring gear. I'm sorry the 6C12 part wasn't part of my limited education. So I can't help with that part. I checked just for fun and there is a 4.10 ring and pinion set available for it.
Good Luck
Good Luck
#5
how do i identify rear axle?
Hi, This may sound really dumb but I need help Identifying both my front and rear axle!! If anyone could give me some help i'd appriciete it!!
I'm not totally sure but I think that I have a Dana 44 6cf-hd int the front and a Dana 60 or 61 in the back with a 4.10!! If there is any way you could help me confirm this that would be great!!
I'm not totally sure but I think that I have a Dana 44 6cf-hd int the front and a Dana 60 or 61 in the back with a 4.10!! If there is any way you could help me confirm this that would be great!!
#6
how do i identify rear axle?
I am guessing your talking about the 74 in your name. Check the tagson the diff cover, someone here can read them for you. If the tags arent there, there should be numbers cast into the diff housings in the area where your axle tubes connect.
Chase
1979 F-250 4x4
71 460 Holley650, MSD OFFROAD, L&L Headers
C6-B&M Transpack
Dana HD44Front/60Rear
35 inch Goodyear Implement Tires
4 inch Skyjacker System
Much more to come
Chase
1979 F-250 4x4
71 460 Holley650, MSD OFFROAD, L&L Headers
C6-B&M Transpack
Dana HD44Front/60Rear
35 inch Goodyear Implement Tires
4 inch Skyjacker System
Much more to come
#7
Trending Topics
#8
Thread
Thread Starter
Forum
Replies
Last Post
abosely
1973 - 1979 F-100 & Larger F-Series Trucks
3
03-27-2016 05:37 PM
mzogs
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
30
12-28-2015 12:31 PM
mzogs
1987 - 1996 F150 & Larger F-Series Trucks
9
12-15-2015 11:58 PM
bryan_johnson
Brakes, Steering, Suspension, Tires, & Wheels
2
11-04-2007 05:44 PM