2007 - 2014 Expedition & Navigator 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014 Ford Expedition and Lincoln Navigator

Adding Turn Signals to Mirrors

Thread Tools
 
Search this Thread
 
  #1  
Old 07-14-2008, 10:16 AM
R-WEST's Avatar
R-WEST
R-WEST is offline
Senior User
Thread Starter
Join Date: Feb 2006
Location: Somerset County, PA
Posts: 207
Likes: 0
Received 0 Likes on 0 Posts
Adding Turn Signals to Mirrors

After a recent lane-changing 'experience' , I'm thinking it might be pretty nice to have some turn-signal indicators in my side mirrors. My '07 EL XLT doesn't have 'em, and I'm wondering if the wires and such are already in there, there's a plastic piece below the mirror glass where the indicators would go, and maybe I can just get the necessary pieces from Ford to install the indicators? Has anyone done this?
 
  #2  
Old 07-14-2008, 11:29 AM
berry1234's Avatar
berry1234
berry1234 is offline
Postmaster
Join Date: Mar 2001
Posts: 4,155
Received 2 Likes on 2 Posts
Not sure on both accounts. You could take a mirror off and see if they have the wire harness there.
 
  #3  
Old 07-14-2008, 11:43 AM
IQ9's Avatar
IQ9
IQ9 is offline
Senior User
Join Date: Sep 2007
Posts: 351
Likes: 0
Received 0 Likes on 0 Posts
I thought someone had asked this question about 2 months ago. Have you tired the search function? If it came up with nothing that it must have been another board that I am thinking about. I thought the answer was yes but you had to splice into the harness on the door-I am not 100% on that though.
 
  #4  
Old 07-15-2008, 06:29 AM
hjsimpson's Avatar
hjsimpson
hjsimpson is offline
Senior User
Join Date: Oct 2003
Posts: 204
Likes: 0
Received 0 Likes on 0 Posts
It must have been another forum. I just did a search and only found my post asking the same question from Oct. of last year and never got a response.

https://www.ford-trucks.com/forums/6...n-signals.html

I wish the other forums would have a separate thread for 07 and newer like this one.
 
  #5  
Old 07-15-2008, 12:27 PM
IQ9's Avatar
IQ9
IQ9 is offline
Senior User
Join Date: Sep 2007
Posts: 351
Likes: 0
Received 0 Likes on 0 Posts
Sorry, I have not had a chnace to look for you.
 
  #6  
Old 12-16-2012, 04:04 PM
edycri's Avatar
edycri
edycri is offline
New User
Join Date: Feb 2011
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Turn signal mirror

It looks like they are available separately now:

New LH Exterior Rear View Mirror Lamp Lincoln Navigator Ford Expedition | eBay

You would have to do some wiring though.
 
  #7  
Old 12-16-2012, 09:39 PM
d_ballance's Avatar
d_ballance
d_ballance is offline
Junior User
Join Date: Jun 2005
Posts: 55
Likes: 0
Received 0 Likes on 0 Posts
I can tell you on the '96 Bronco (which were the first vehicles ever to have the turn signal in the door mirrors) I purchased a set of signal flash mirrors and when I got the OEM mirror off, door panel off, and ready to plug everything in I found out that:

The vehicles that came with the turn signal in the mirror had a different plug (one extra connector) in the mirror, and plugged into a female that ran through the door and under the dash that had the extra pin in it as well, so it wasn't a direct plug and play.

I didn't research it further to see if I could change the plug and wiring under the dash that went into the door.
 
  #8  
Old 12-19-2012, 09:45 AM
cstanley44's Avatar
cstanley44
cstanley44 is offline
Senior User
Join Date: Jun 2011
Location: Orlando, FL
Posts: 123
Likes: 0
Received 0 Likes on 0 Posts
Im on an Explorer Forum where someone asked a similar question.
2002-2005 Explorer
They added Aviator mirrors to their Explorer and wire harness were different. He had to run a wire for the turn signal
http://www.explorerforum.com/forums/...=183506&page=2
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
chocolatechip3512
1999 to 2016 Super Duty
3
01-09-2024 02:21 PM
BigBlue92
2009 - 2014 F150
2
03-26-2016 04:28 PM
CTE2
1999 to 2016 Super Duty
1
10-05-2015 04:23 AM
The_Punisher
Excursion - King of SUVs
9
11-04-2012 11:35 AM
Futuresweets-10
1999 to 2016 Super Duty
3
04-25-2010 07:29 PM



Quick Reply: Adding Turn Signals to Mirrors



All times are GMT -5. The time now is 08:26 AM.