I have a set of 5 16in stock steel wheels 5 on 5 1/2 with 3 3/8ths center hole with 235 85 R16 tires, they are from a 1966 F100 also 352 V8 with 4spd from same truck.
PM me with any questions Other parts to for 66 f100
Thanks Bill W

 

I have recently purchased a 1994 F250 4X4 XLT. I am looking for winch bumper with or without winch.

Is this a good bone yard item?

Please let me know if you know anyone that is has an extra or just does not use theirs.

Thanks Tom

602-299-5295

 

Look at this Big Bad Ranger waiting for paint!!!!!

Dana 44 front
13 bolt rear
38" tires
460 ENGINE!!!!
C5 auto tranny
3 shock tower on each wheel
B&M shifter
4 Barrel Holley Carb
Custom interior and upholstery
Aftermarket gauges
VERY CLEAN!!!!

This truck will run over cars!!!!!! AND you can drive it to work or school!
CALL JR AT 480-217-2764

<a href="http://photobucket.com" target="_blank"><img src="http://i76.photobucket.com/albums/j21/woodys12578/CraigslistStuff009.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>

Try these links:

http://i76.photobucket.com/albums/j2...stStuff009.jpg


http://i76.photobucket.com/albums/j2...stStuff010.jpg

http://i76.photobucket.com/albums/j2...stStuff047.jpg

http://i76.photobucket.com/albums/j2...stStuff044.jpg

http://i76.photobucket.com/albums/j2...stStuff043.jpg

http://i76.photobucket.com/albums/j2...stStuff011.jpg

http://i76.photobucket.com/albums/j2...stStuff050.jpg

http://i76.photobucket.com/albums/j2...stStuff046.jpg

JR AT 480-217-2764

Located in chandler Arizona
OR you can email me at woodys12578@yahoo.com

JR 480-217-2764

 

I am looking for a front bumper for my 1993 F-250, perferably a double tube with a grill guard-smittybilt style, or a stock 95+ front bumper with the cut outs.

I have a few parts from a 1980 F-150 single cab long bed 4X2:tilt steering column, stock chrome front bumper, both drivelines, all been sitting in the weather for a while

I have a stock air cleaner assembly with the "soup bowl" cut out with a K&N filter, and a complete custom 3" exhaust out of a 1993 F-250 extended cab 4X4 with a 7.3L n.a. motor, it's was cut in front of the muffler for removal, the rest is welded

 

Bump Guys ..selling this on ebay ending tomorrow 1984 Ford Ranger...
Check me out to come see it...JR 480-217-2764

 

139,000 miles, fresh blue paint, truck has small cosmetic flaws, truck runs well, asking $5,900 OBO. Call 928-221-2424 and leave a message if there is no answer. Thanks.

 

I have a set of Paddle style power mirrors from my 2000 F250. They should work from 99-04 years no problem. I upgraded and got towing mirrors after I bought the truck....

 

I no longer have need for all that power, so I traded my 2004 6.0 in for a 2007 4X4 150 XLT Super Cab.

I now have a HFCM Drain Valve, A Fumoco Oil Drain Valve, A Fuel Filter set, and some Diesel Kleen, all which I can let go for a reasonable price.

I am from the Phoenix west side.

PM me for any other details.

 

I have a plain jane ford 302, .030 over with the rebuild. rebuild was 1991, IIRC, and truck had approx 15-20k miles on it when I pulled the motor out for a rebuild of the truck. Would like have it go to a "good home" here in phoenix area. Ran very strong while I used it as a daily driver. Somebody make me an offer and take it off my hands. I would like to clean up the shop.

PM me here and I'll send you my phone number. Steve

 

I am travelling to So Cal with a small group from Southern Ontario next week.
A friend of mine can bring in all the trim and other (I mean ID) to change a truck over from a Ford to a Mercury except for tailgate.

The "M" Series Trucks were built in Canada to fill a need in the Dealer Distribution Network here in Canada. Except for a few engine differences in the early years - [1947-54], they are essentially Badge Engineered Ford "F" Series Trucks.

He can do any year from 61 to 67.

If you are interested, contact me by private post B4 Saturday as we leave Sunday.

GW

 

hey guys i just picked up a 1977 f-150 ranger xlt and have decided to part out my 76 f-100 supercab no motor or trans. has good glass and doors some good chrome it has a flat bed on it right now with a ladder rack but i do have the bed also it is listed on craigslist for free though it does have a good title and a good ford nine inch rear end with 3.00 gears. make me an offer i can deliver for a small fee also it is located in prescott valley email me or call me and leave a message at 928-710-9404 thx ray.

 

any one want to buy a 97 f250hd 7.5L with a custom 6inch long travel lift fox resis up front and bilstein piggys in the rear lots of add on to this truck it is in almost new condition $12,000 obo

 

my number is 480 246 4209 jesse

 

Wanted 94 mustang gt rear end damage cool but front from doors forward must be in good shape need not run at all.

 

I'm selling a 1988 Dodge D250, with a covered utility bed, 2wd, 360, (new Holley 4175) 4sp, P/S, P/B, cold A/C converted to R134A, (new compressor) 3:54 gears, This truck has 119,000 original miles, I have replaced all hoses, belts, new radiator, back-up electric fuel pump, new dual exhaust, utility box is carpeted for camping, the cab has new carpet, side windows new tint, tires good, (2 extras). Would consider it as a part trade on either a 90s 4x4 Ranger V-6, or I'm looking for a 95-97 F250 4x4, 460, Super cab, long bed, Both prefer around 100,000 miles, NO HIGH MILERS.
Any questions feel free to PM me. I also have an 86 F250 4x4 460 C-6 that I would sell or part trade on a 95-97 F250 as I stated above. Picture in my Gallery.
Thanks, Craig