Alarm question
#1
#4
berry1234,
I haven't had the alarm installed yet. I was speaking with an installer and he said that the alarm (code srt6700) dome supervision output was a timed 30second output and that he typically ties it into the domelight switch behind the dash. He said that the lights would no longer fade on and off, rather they would come directly on and then turn off after 30 seconds.
SOB Racing,
Do you happen to know which wire(s) to tie into? The issue the installer brought up was that the GEM disables the lights after a certain amount of time and that the door trigger wire would not be able to turn them on. For whatever reason, he said tying directly into the switch allows you to turn on the lights regardless of the GEM status.
Thanks for the info fellas!
Russell
I haven't had the alarm installed yet. I was speaking with an installer and he said that the alarm (code srt6700) dome supervision output was a timed 30second output and that he typically ties it into the domelight switch behind the dash. He said that the lights would no longer fade on and off, rather they would come directly on and then turn off after 30 seconds.
SOB Racing,
Do you happen to know which wire(s) to tie into? The issue the installer brought up was that the GEM disables the lights after a certain amount of time and that the door trigger wire would not be able to turn them on. For whatever reason, he said tying directly into the switch allows you to turn on the lights regardless of the GEM status.
Thanks for the info fellas!
Russell
#5
#7
Trending Topics
#8
I can remote start it from one mile away, it auto locks the door in 30 seconds after you turn it off, (with key in or out) and you cannot restart it without disabling the alarm. It does a ton of other cool stuff too.