Chapter Buy/Sell/Trade Ads: Each chapter will have one (1) thread for chapter members to list items wanted, for sale or for trade. The rules for posting in this thread are as follows:

• Only Ford truck related items and automotive tools & equipment can be listed.
• Only one picture is allowed per post, per item. If additonal pictures are necessary, place a link in your post to those pictures. Additional posted pictures will be removed without warning.
• You must have your private messaging (PM) turned on and be able to receive PM's to post an ad in the Chapter thread. If you do not, your post will be removed.
• Use the PM or email system to conduct all discussion and transactions regarding the item(s). You can post your interest in the item(s) and that you’ll contact the seller but no discussions. Keep it short.
• If you post an ad, please reply that you found, sold or otherwise disposed of the item.
• The buy/sell/trade thread will be purged periodically for old postings. Generally every 30 to 60 days.
• You need to be an active Chapter Member on FTE to post a wanted, for sale or for trade item(s). No Exceptions.
• You must have permission from the Chapter Leader or a Regional Moderator to post an ad in a chapter that you are not a member of.
• If you are new to FTE (less than 15 days) or have less than 25 posts, you must contact the Chapter Leader for permission before posting an ad.
• Your ad or reply to any ad is subject to editing or deletion at discretion of the Chapter Leader, Moderators or Administrators of FTE.
• Commercial advertisements are strictly prohibited.

Archived HP Buy/Sell/Trade Ads,,, https://www.ford-trucks.com/forums/7...trade-ads.html

 

Well, its that time of year to do the spring cleaning, so here is some of the things I have to get rid of: 73-79

(1) windshield
asst. sending units for gas tanks
asst. mouldings
factory toolbox parts; doors and liners
engine mount towers: 360,390,400 and 400 4x4
some supercab misc.
non tilt steering columns
hood hinges
390 engine, disassembled
FE heads

I probably have more but I cant think of it right now,, if you are looking for something,, ask me,, i might have it.

 

390 FE, disassembled, two sets of heads
supercab opening quarter glass
4x2 steering box
4x4 steering box, 79
bronco high back buckets with armrest on each side and console for the middle
4x4 c-6,for a 400
400 exhaust manifolds

 

WANTED: Divorced NP205 for Chevy or Dodge.


Here's the deal before you go ballistic on me!!!
I'm converting my 73 Ford 2wd into a jacked up 4x4. I'm using a Chevy Dana 60 front. Does anyone here have a divorced NP205 for a Dodge or Chevy?

Thanks,
Cody

 

no transfer cases
and as far as the steering boxes, they seem to be ok. I just bought one a month ago for 65.00 and now I dont need it

 

It's not really automotive related, but I'm a drifter and am looking for an item. Figured I'd throw it out there and hope.

I'm looking for a used fourwheeler frame, in good condition, for my 1997 Yamaha Kodiak 400 4x4. Bare frame is great, or one with problems (bad motor, etc) is fine. The cheaper the better, but it must be in decent condition. I'm located in Central, ND.

My Kodiak took a BIG beating last summer. I found out the frames are not strong enough to clear a two-lane highway repeatedly. Tore it down and found 7 broken spots on the frame, therefor I need a new one.

Thanks alot.

 

need clutch plate and/or kit for 1996 Ford Ranger XLT, 2WD as well as front passenger side headlight assembly and turn signal assembly. Stevensville, Montana

 

need 400 rebuildable, windshield- hood, all for 73-79. Also interested in all 73-79 parts. I have a '77 150 4x4 351, c-6 (400 is stock motor for this truck) also would be interested in c-6 for 390 block and 390 engine that is rebuildable.

 

really interested in finding that fe c-6.

 

If anyone knows where a 97-98 f150 4.6L 3dr is with a good cab and front clip is for cheap, let me know. Got a rolled one that needs fixing. Doesn't need to have a drivetrain, just a straight body.

 

I have exhaust manifolds with the A.I.R fittings and the stock intake manifold off of my 86 460.
I also have the stock air cleaner for the same as well.
$100 takes it all.

 

Needed!! bed for a77-79 f-250 long bed with dual tanks mine got beat up when a scmuck side swiped me a few years back. oh not to mention trying to push trees over accidentaly lol

 

85 F250 with 460 - 4bbl, runs great, no smoke or rattles. Can hear it run unless you wait too much longer. I'm going to be junking the rest of the truck out. My brother has the box and front fenders. That leaves me with a cross box tool box, engine, tranny (automatic), New Tires on stock wheels. Frame, cab & running gear.

460 - $600 cash..( you can't even buy a block as good as this ,for this price, at a junk yard.)
tranny - best offer, you remove
tires and wheels .... $150 or best offer.
diferential and running gear .. 2 wheel drive ... best offer ... you haul.
tool box ... needs keys made, but weather proof .... best offer.

Or make me an offer on the whole nine yards...one I can't refuse. You come and get it. Will accept cash or the right gun as part trade.
PM me for particulars and I'll get what answers I can. The cab is also rust free but needs interior work after sitting in Kalifornia sun too long.

 

Pictures posted in my gallery of the F250. Not the greatest due to shade, but they'll have to do.

 

you have some nice fords in your past 55. I wish I had pics of all my ford rides...from my '57 pickup, 74 pinto (whooohaaa), 67 cougar....