Archived GA Buy/Sell/Trade Ads
#1
Archived GA Buy/Sell/Trade Ads
'Blue,
I tried to sell my '72 Bronco on the main classifieds and, although I had over 150 lookers, I never got a response. Right now, I have an engine, transmission and transfer case on there from a '66 Bronco, but have gotten zero. So, if anyone is interested, let me know...
Johnny
I tried to sell my '72 Bronco on the main classifieds and, although I had over 150 lookers, I never got a response. Right now, I have an engine, transmission and transfer case on there from a '66 Bronco, but have gotten zero. So, if anyone is interested, let me know...
Johnny
Last edited by captradiator; 03-12-2006 at 07:43 AM. Reason: Spellimg
#2
parts
Not sure this is the right place----looking for chrome trime for a 1978 crew cab---more so the rear doors and the small piece between the front and rear door---let me know if you know where I might could get it rskp@bellsouth.net
#3
1951 or 52 for sale............
My friend is trying to get rid of some projects, so here it is: a 1951 or 52 (not sure) no motor or tranny, very much a project! Truck has a GM front and rear suspension set up for small block Chevy. Truck I believe comes with an extra set of front and rear fenders. It has been chopped 3 or 4 inches and is missing a door, also there is no glass. The hood and grill are in very good shape too. here is a link to view about 30 pics ot the truck. Truck is located in Snellville/Lilburn area. Asking $800 just getting out what he has in to it. Thanks for looking, pm me with any questions. Thanks again.
tony
edit* I guess I could list the link for the pics
www.pissedandproud.com/tony/matttruck dont know why i cant post the clickable link, but anyways.
tony
edit* I guess I could list the link for the pics
www.pissedandproud.com/tony/matttruck dont know why i cant post the clickable link, but anyways.
Last edited by 60FordDriver; 04-03-2006 at 12:34 PM.
#5
Lookin to sell my truck ASAP, just started a new job in Atlanta with the FD and need something more traffic friendly while I'm in training...
- 1996 F-250 XLT ext. cab long bed
- 5 spd
- 145000 mi
- 460ci 7.5L
- vinyl flooring, interior/exterior in good shape
- windshield has a couple cracks on the pass side but neither of them leak
tailgate is dented, but still opens and shuts fine
- aftermarket speakers and cd player
- LuK Pro Clutch about 6 mo. old
- 2.5" leveling kit in front
- 285/75 16 Mickey thompson baja radials, 3 of them have about 30% tread and the right rear needs replacing due to a burnout
- needs new clutch master cylinder, doesn't leak but the rod that comes through the firewall is wore out and there is play in the clutch pedal
- also needs new set of front rotors
- K&N intake, Flowmaster exhaust
Despite the condition it sounds, the truck is actually in very good shape. I always changed the oil every 3-5k and checked the fluids regularly. These few things it needs I just don't feel like doing and need to move this thing ASAP. Here are a few pics...
$6500 OBO, like I said, I need to move this thing ASAP. My email is jeepxjga@gmail.com and you can PM me here as well. Thanks
- 1996 F-250 XLT ext. cab long bed
- 5 spd
- 145000 mi
- 460ci 7.5L
- vinyl flooring, interior/exterior in good shape
- windshield has a couple cracks on the pass side but neither of them leak
tailgate is dented, but still opens and shuts fine
- aftermarket speakers and cd player
- LuK Pro Clutch about 6 mo. old
- 2.5" leveling kit in front
- 285/75 16 Mickey thompson baja radials, 3 of them have about 30% tread and the right rear needs replacing due to a burnout
- needs new clutch master cylinder, doesn't leak but the rod that comes through the firewall is wore out and there is play in the clutch pedal
- also needs new set of front rotors
- K&N intake, Flowmaster exhaust
Despite the condition it sounds, the truck is actually in very good shape. I always changed the oil every 3-5k and checked the fluids regularly. These few things it needs I just don't feel like doing and need to move this thing ASAP. Here are a few pics...
$6500 OBO, like I said, I need to move this thing ASAP. My email is jeepxjga@gmail.com and you can PM me here as well. Thanks
#6
wtb rear end 1994 f150 4wd
i need a rear end or need to find someone that can rebuild mine
i am loacetd in n.e ga near buford/lake lanier area.
e-mail me at
zzrtwofiddy@yahoo.com
thanks all
i am loacetd in n.e ga near buford/lake lanier area.
e-mail me at
zzrtwofiddy@yahoo.com
thanks all
#7
ok guys, just moved here, and i need to find somthing to drive. would like an extended cab, or a bronco/jeep. really, somthing realiable to get me to school. i guess im working with about a 2000 dollar budget, i know whatever it is it wont be perfect, but i would like somthing pretty decent. anyone got anything, or have seen anything around town? thanks guys.
Trending Topics
#8
2004-05 F150 Supercab Leer F/g Bed Cover
HARD BED COVER CAME OFF MY 2004 F150 AND I NOW HAVE A F-250 LB
THE COVER IS FORD BLACK AND I PAID CLOSE TO $900.00 FOR IT
IT IS FOR A REG BED NOT THE SHORT BED. HAS HYDROLIC SHOCKS ON EACH SIDE
IF YOU ARE INTERESTED CALL EDDIE @ 678-616-6717 OR E-MAIL FACTORE0465@NETZERO.COM
ASKING $500.00 OBO
SUPER SMOKING DEAL
TELL YOUR BUDDIES
THE COVER IS FORD BLACK AND I PAID CLOSE TO $900.00 FOR IT
IT IS FOR A REG BED NOT THE SHORT BED. HAS HYDROLIC SHOCKS ON EACH SIDE
IF YOU ARE INTERESTED CALL EDDIE @ 678-616-6717 OR E-MAIL FACTORE0465@NETZERO.COM
ASKING $500.00 OBO
SUPER SMOKING DEAL
TELL YOUR BUDDIES
#9
1968 Ford F100 LWB Inline Six
Motor: I-6 300 less then 10k on rebuild.
3 speed on the tree.
3.70 9" Rear End
New Carb, Dizzy, Fuel Pump, PLugs, Wires, MasterCylinder, Battery, Coil Pack, Raditor and support,and overall tuneup.
Recent black pain job, truck does have minor dings but virtually no rust.
Tires have less then 4k miles on them.
Would make a great start to a full restore with the good shape its in. I currently use it as a daily driver.
Pictures available upon request.
For more info or test drive. 770-328-2390 Jason
Motor: I-6 300 less then 10k on rebuild.
3 speed on the tree.
3.70 9" Rear End
New Carb, Dizzy, Fuel Pump, PLugs, Wires, MasterCylinder, Battery, Coil Pack, Raditor and support,and overall tuneup.
Recent black pain job, truck does have minor dings but virtually no rust.
Tires have less then 4k miles on them.
Would make a great start to a full restore with the good shape its in. I currently use it as a daily driver.
Pictures available upon request.
For more info or test drive. 770-328-2390 Jason
Last edited by fusioncom; 09-27-2006 at 01:49 PM.
#10
!!wanted!!
Waving 4 Fingers and a thumb at ya'll. I am having a hard time finding a transmission for my Ford. Here's the Specs:
1989 Ford F-150
302 V8
2 Wheel Drive
M5OD-R2 5 spd tranny.
If anybody has ANY transmissions for a full size 2 wheel drive truck please send me an email either on here or at southernsnuff@yahoo.com Please email also if you need any further information.
Thanks, Ya'll!!!
- Jeff Buckner
(The Georgia Redneck from Loganville)
1989 Ford F-150
302 V8
2 Wheel Drive
M5OD-R2 5 spd tranny.
If anybody has ANY transmissions for a full size 2 wheel drive truck please send me an email either on here or at southernsnuff@yahoo.com Please email also if you need any further information.
Thanks, Ya'll!!!
- Jeff Buckner
(The Georgia Redneck from Loganville)
#11
2002 Ford F250 Crew Cab short bed
Gray in color. Crew cab. Front bucket all power seats. 82k miles, 5.4l v8. Chrome step tubes. Power windows, power door locks, sprayed in bedliner.All in great shape.
Asking 18000
Located in Atlanta, Ga
This is the only pic I have right now but if you email me at gawjatl@hotmail.com I can attempt to provide additional shots:
Asking 18000
Located in Atlanta, Ga
This is the only pic I have right now but if you email me at gawjatl@hotmail.com I can attempt to provide additional shots:
#12
Parts!!!
Anybody with parts vehicles?
WANTED... (NEEDED REALLY):
- Steering Column 1987 - 1991 w/Man. Tranny
- O.E. Wagon Wheels, preferably... but any set of 4 will work
- Front Bumper
- Gauge cluster w/Tach.
- 4 Wheel Drive Leaf Springs, U- Bolts and Front Springs
If anybody has, or knows where I can go to get a good deal on some or all of these items, please let me know.
- Jeff Buckner
WANTED... (NEEDED REALLY):
- Steering Column 1987 - 1991 w/Man. Tranny
- O.E. Wagon Wheels, preferably... but any set of 4 will work
- Front Bumper
- Gauge cluster w/Tach.
- 4 Wheel Drive Leaf Springs, U- Bolts and Front Springs
If anybody has, or knows where I can go to get a good deal on some or all of these items, please let me know.
- Jeff Buckner
#13
got a stock instrument cluster out of my 72 early bronco. worked when i removed it back before i really got into the bronco scene. also have the speedo cable that goes with it
-cutts-
-cutts-