Chapter Buy/Sell/Trade Ads: Each chapter will have one (1) thread for chapter members to list items wanted, for sale or for trade. The rules for posting in this thread are as follows:

• Only Ford truck related items and automotive tools & equipment can be listed.
• Only one picture is allowed per post, per item. If additonal pictures are necessary, place a link in your post to those pictures. Additional posted pictures will be removed without warning.
• You must have your private messaging (PM) turned on and be able to receive PM's to post an ad in the Chapter thread. If you do not, your post will be removed.
• Use the PM or email system to conduct all discussion and transactions regarding the item(s). You can post your interest in the item(s) and that you’ll contact the seller but no discussions. Keep it short.
• If you post an ad, please reply that you found, sold or otherwise disposed of the item.
• The buy/sell/trade thread will be purged periodically for old postings. Generally every 30 to 60 days.
• You need to be an active Chapter Member on FTE to post a wanted, for sale or for trade item(s). No Exceptions.
• You must have permission from the Chapter Leader or a Regional Moderator to post an ad in a chapter that you are not a member of.
• If you are new to FTE (less than 15 days) or have less than 25 posts, you must contact the Chapter Leader for permission before posting an ad.
• Your ad or reply to any ad is subject to editing or deletion at discretion of the Chapter Leader, Moderators or Administrators of FTE.
• Commercial advertisements are strictly prohibited.

Archived ADs can be found here,,, https://www.ford-trucks.com/forums/7...trade-ads.html

 

Thanks Rich

 

OK all,
I'll be in the market for some body parts at some point. It's not super high on my priority list, getting her on the road is first. My truck has been hit pretty hard in the front. Lots of bondo there now. I'll be needing both front fenders and a hood at some point. The dually fenders are pretty beat up too. I found a set on CraigsList for $180 but I'd rather throw that money at mechanical first so I'm sure they'll be gone by the time I get ready for them.

I'll keep an eye on this thread for items wanted as well. I check CraigsList on probably an hourly basis looking for parts so I may find a link for someotherbody too.

Mike
'93 F350, 4x2, CC, DRW, NA 7.3, E4OD, 4:10.

 

Fabman,
Here's one for you:
http://portland.craigslist.org/clc/pts/278642939.html

Not sure if that's exactly what you're looking for or not, but it's probably close.

Mike

 

Not quite what we're looking for, but thanks for thinking of me! My son's truck needs everything, from the flywheel, bellhousing, clutch parts, pedal assy, Etc.
It has a C-6 auto now, and we want to change over to a manuel trans for better milage, He drives it 265 miles every day!

 

Fabman (and whomever else is interested),
Here's another on Portland's CL:
http://portland.craigslist.org/nco/pts/276151575.html

One's got the manual tranny, could probably get all the parts you & your son need from that one.

Mike

 

Thanks for the link Mike. We checked into it, but it is a 4 speed, not a 5 speed. We really want the overdrive. My son Harley drives 250 miles per day on his route, and even with biodiesel would like to get better mileage

 

No prob Fab, I'll keep looking for you. I have RSS feeds set up for all of Oregon's CraigsList sites searching for parts for my truck. It doesn't take me any more time to look for 5 speed parts for you too and I'm happy to do it.

Mike

 

Don't need my old tow truck anymore, anybody need one?

"75" Ford F-350, Weld-Built wrecker body:


Need more pics? Just PM me. $2,500

 

4x4, 460, supercab, long box. just lifted with the 35" BFG's tranny just gone through , added tranny cooler, temp guage. Put new torque converter in. 125,000 on it. nice truck. pm or email me for details and pics rayjc@wbcable.net

7500 obo

 

one for an AT trans if possible. Thanks; Webster

 

Selling an Edge Juice for 01-03 7.3l Powerstroke. Will include an a-pillar mount and windshield mount that goes above the rear view mirror.
Comes with the pyrometer probe. Still works like new, looking into puchasing a different tuner. If interested, email white.todd@comcast.net.
More info can also be found on Edge Diesel's site at www.edgeproducts.com
Thank you for looking.

 

Hey guys. This looks like a good deal to me. I can't use it but maybe one of you can:

http://portland.craigslist.org/mlt/car/357825053.html

 

I have a set of 92-96 F150/Bronco factory non-rivet wheels, caps and 31" tires for sale. These will fit 1/2 ton trucks and fullsize broncos 96 and earlier. They have 4x4 center caps for the front and the rear caps have black centers.

I also have a set of 94-98 Mustang GT 5 spoke 16" wheels with mismatched tires available

 

I have a 1968 Ford F-250 for sale.

here are the specs.

1968 Ford F-250, Red

- 360 C.I. V8
- NP435 4 speed transmission
- Dana 60 rear end; geared 3.73:1
- New water pump
- Recent tune-up
- New alternator
- New steering column bearings and rag joint
- Rebuilt brake master cylinder
- New fluids
- Overload coil springs in the back
- Front and rear 2” receiver hitches
- Period correct interior
- Runs and drives great, Lots of power
- Original ford 1968 specific vehile manuals, all three volumes
- Completely stock, no add-ons, or modifications to detract from original condition.
- Great base for restoration, or just drive as it is
- Asking $1,650.00

Personally, I'd like to see this truck go to a caring owner, so I'm posting it here first.
If anyone has any other questions about it, PM me.

Oh, and if anyone has a late 40's or early 50's Ford or Mercury coupe project or something i could make into a project layin around, let me know!