where is the best place to find one like in a magazine or catalog

 

Red's Headers. Great people and they have everything you need. There should be an attached link, but if not - www.reds-headers.com
Patrick's is another good one too. www.patricksantiquecars.com

Both will sell you what you need and will work with you to make sure you don't buy something you don't need or want.
Attachments:

 

i checked them out holy crap they are a bit on the expansive side.

 

Expensive, too. But rebuilding a flathead has gotten REAL expensive in the last few years. Figure 2 to 3 grand for a good rebuild or spend 5 at Flathead Jacks

 

Try Joblot www.joblotauto.com

 

[updated:LAST EDITED ON 01-Mar-02 AT 08:23 PM (EST)]If you're near Rochester, NY, I'd try Flathead Sales & Service at (585)293-3203. Last I knew they were rebuilding engines for about $1800 - guaranteed. I've been bugging them & they still aren't up internet wise.

 

 

Is your engine a V8 or six? If it's a M series six, pls e-mail me; THANKS

John

 

Look at www.yesteryeartractor.com I was looking at Flathead engine parts and they seemed very reasonable there. Only thing is you have to know the tractor designation for your engine 8N, 9N, ect.