Shifter Linkage
#1
Join Date: Apr 2006
Location: Saskatoon Saskatchewan
Posts: 12,281
Likes: 0
Received 1 Like
on
1 Post
Shifter Linkage
Okay guys i need some quick help i bought my 1993 F150 (in sig) in November of 2006 ever since i even test drove it and got it.. It seems to have sloppy shifter linkage like its hard to put into gear you have to pull hard its not smooth
shifting into a any gear how would i go about fixing this or tightening something to make it shift easily in gear and have tight linkage and feedback is appreciated
shifting into a any gear how would i go about fixing this or tightening something to make it shift easily in gear and have tight linkage and feedback is appreciated
#2
#3
replace the cable from under the steering column .... to the trans . If you dont .... you will break the shifter tube in the column soon ..... pain in the a when that breaks trust me .
Ok now after you replace the cable .... you have to adjust the new cable .
Keep messing with different places until you can get that joker into drive , and park ....
Ok now after you replace the cable .... you have to adjust the new cable .
Keep messing with different places until you can get that joker into drive , and park ....
#4
Check the bracket on the frame just to the left of the trans where the linkage goes mine did the same thing and then just snapped one day while i was heading out ( that will really **** you off) I fabricated a new bracket lined the hole with some 1/4 Teflon it has worked great since good luck
Thread
Thread Starter
Forum
Replies
Last Post
Aaron-71
1973 - 1979 F-100 & Larger F-Series Trucks
40
09-15-2021 08:10 PM
bopfly
1987 - 1996 F150 & Larger F-Series Trucks
5
05-16-2016 09:26 AM
CrappyPappy
1987 - 1996 F150 & Larger F-Series Trucks
3
05-04-2016 04:58 PM
F-WhiteThunder
Escape & Escape Hybrid
5
09-17-2015 07:26 AM
SonofaFord
Clutch, Transmission, Differential, Axle & Transfer Case
1
06-05-2011 04:04 PM