Tradin,selling and buying in Minnesota thread
#1
85 F150 4x4 for sale
Hi guys. I'm putting my daily drive up for sale if anyone in MN is interested. Its a 85 F150 4X4, 351 HO, C6, 9 inch rear. Truck runs pretty good. Body is somewhat rough with the usual rust from here in MN. Truck has many new parts. Asking $1200. Let me know if interested.
Thanks
Thanks
#2
flowmaster 40 single exhaust
Hi. I am trying to sell my flowmaster 40 series exhaust system because i am puttin dual exhaust in.
This system included the flowmaster 40 series muffler, tailpipe custom bent at 45º and a large chrome tip, along with rear hanger. The other hanger i will not include because it is too old and abused.
It was taken off my 1988 ford f150 302. The sound was a change from stock, but I didn't notice it in the cab when on the highway, which is nice. The system has less then 3,000 miles tops, but has NO rust, chrome tip shines up well. The system is good as new
flowmaster muffler..$120
tailpipe....$50
large welded chrome tip...$25
I am asking $160 for the system
Please contact me via email or private message. I would not like to have to ship it. I am located in Mankato, MN and will travel within a reasonable distance.
thanks,
Josh
This system included the flowmaster 40 series muffler, tailpipe custom bent at 45º and a large chrome tip, along with rear hanger. The other hanger i will not include because it is too old and abused.
It was taken off my 1988 ford f150 302. The sound was a change from stock, but I didn't notice it in the cab when on the highway, which is nice. The system has less then 3,000 miles tops, but has NO rust, chrome tip shines up well. The system is good as new
flowmaster muffler..$120
tailpipe....$50
large welded chrome tip...$25
I am asking $160 for the system
Please contact me via email or private message. I would not like to have to ship it. I am located in Mankato, MN and will travel within a reasonable distance.
thanks,
Josh
#3
1988 F150 4 sale good truck
Brown, lifted, good body,heardly any rust 35 inch tires, chrome roll bar, six kc lights,Engine is in good shape. The truck neeeds an allignment, and new u-joints on the front drive shaft. This is my everday driver, but am looing for something smaller, feel free to call or email me 952-486-7881 Jon neoflee@mn.rr.com for pic's
#5
I many misc parts for 70's and 80's Ford Trucks.
- 351M cores
- 2wd and 4wd rolling frames
- rebuilt smallblock C-6 4wd and one stock
- 90 EFI 460 with computer and wiring
- Old Minnegasgo Fiberglass Utitity Box
- 2 bronco tops with good glass
- etc
- 351M cores
- 2wd and 4wd rolling frames
- rebuilt smallblock C-6 4wd and one stock
- 90 EFI 460 with computer and wiring
- Old Minnegasgo Fiberglass Utitity Box
- 2 bronco tops with good glass
- etc
#6
Originally Posted by nebechanezer
i'm looking for a running 400 for my '77 highboy plowtruck. ok if it needs tune-up or seals, just want a cheap runner to get me by. located in central mn. thanks
#7
86 F350 and 87 F150 F/S near Little Falls
I have a E350 mini bus with a good 460 and C6 tranny I belive,not to rusty and in good shape.
I replaced the seats and it has two capt chairs and a fold down bed/seat.
It also has the handicapped wheelchair ramp that works pretty good,just needs some adjustments.we bought a van so we dont drive it anymore and I hate to let it just sit.
Im looking for $1800.00 OBO
Next is a 87 F150 king cab that has a newer crate motor(302)OD tranny and newer tires on the rear,it's rusty and the rear end has a shake at around 45 or so,I never really looked into it to see what it was.
The interer is in good shape and the 4x4 all works.
$900.00 OBO
My number is 320-749-2389 if anyone is interested,
Thanks,
Russell
I replaced the seats and it has two capt chairs and a fold down bed/seat.
It also has the handicapped wheelchair ramp that works pretty good,just needs some adjustments.we bought a van so we dont drive it anymore and I hate to let it just sit.
Im looking for $1800.00 OBO
Next is a 87 F150 king cab that has a newer crate motor(302)OD tranny and newer tires on the rear,it's rusty and the rear end has a shake at around 45 or so,I never really looked into it to see what it was.
The interer is in good shape and the 4x4 all works.
$900.00 OBO
My number is 320-749-2389 if anyone is interested,
Thanks,
Russell
Trending Topics
#8
Supercrew Fiberglass tonneau
Excellent condition, this lid uses ******** quick mount system that is basically an aluminum subframe that mounts to the bed much like a soft cover and all the brackets are mounted to it so there is no drilling into the bedrails!
I need a soft cover as I am hauling more and more large equipment/toys. I am asking $500 plus shipping (I have a great shipping source, shoot me an email for quotes)
OR
Will trade for an excellent condition Truxedo low profile or Access cover plus $150.
Will deliver up to 60 miles after payment is recieved.
Thanks for looking
Josh
I need a soft cover as I am hauling more and more large equipment/toys. I am asking $500 plus shipping (I have a great shipping source, shoot me an email for quotes)
OR
Will trade for an excellent condition Truxedo low profile or Access cover plus $150.
Will deliver up to 60 miles after payment is recieved.
Thanks for looking
Josh
#9
68 360-390 motors 4 sale or trade
got some fe parts 2 motors both complete one is just missing the carb i am not shure if eather run both turn over and i was told they both ran when parked but i am shure we have all heard that befor
they are both 1968 models i am gonna take them to the scrapper in the next few days i need to make room in the shop and sick of trippin over them if anyone needs any parts off them or wants them whole let me know i am kinda looking for a set of c8ve-c9ve or dove heads i would be willing to do some tradeing even better i am looking for dooe or d2oe heads
thanxs
jesse
they are both 1968 models i am gonna take them to the scrapper in the next few days i need to make room in the shop and sick of trippin over them if anyone needs any parts off them or wants them whole let me know i am kinda looking for a set of c8ve-c9ve or dove heads i would be willing to do some tradeing even better i am looking for dooe or d2oe heads
thanxs
jesse
#10
Collection of Super Ford magazines for sale (Maple Grove)
I have a collection of 48 issues of (now-defunct) Super Ford Magazine. They are in very good condition, are pretty hard to find, and a "must have" for an early 90's Ford guy. If they don't sell here I'll put them on eBay, and if they don't sell there I'll probably just toss them.....
<center>
</center>
The magazines I have are as follows:
1990:
-June, July, August, September, October, November, December (7 issues total)
1991:
-January, February, March, April (4 issues total)
1992:
-August, September, October, November, December (5 issues total)
1993:
-Complete except for August (11 issues total)
1994:
-Complete year (12 issues total)
1995:
-January through September (9 issues total)
I would like to get $25 for the lot, but I'm open to "suggestions".....
Please PM me through here, and "Thanks" for looking!
Jim
<center>
</center>
The magazines I have are as follows:
1990:
-June, July, August, September, October, November, December (7 issues total)
1991:
-January, February, March, April (4 issues total)
1992:
-August, September, October, November, December (5 issues total)
1993:
-Complete except for August (11 issues total)
1994:
-Complete year (12 issues total)
1995:
-January through September (9 issues total)
I would like to get $25 for the lot, but I'm open to "suggestions".....
Please PM me through here, and "Thanks" for looking!
Jim
#12
Lightbar/hitch reveiver/grille gaurd
Made it out of 2", .250 walled steel tubing. Angles are cut and welded at 45º's 4-200 watt lights. BRIGHT! two clevis tabs and celeivs'. 4-grade 8 bolts. all wiring was done inside the tubing. wired so there are two switches. one for the inside two, and one for the outside two. All wiring included, everything included
Spent $180 on just metal
$200 obo
Fits 80-91 for sure. I am not positive about the newer because of the crumble zones.
I am in mankato, MN and it needs to be picked up, or meet up within reasonable distance.
I also have a good stock front bumper from my 88. Inlcudes the brackets, and two bumper bumpers
Made it out of 2", .250 walled steel tubing. Angles are cut and welded at 45º's 4-200 watt lights. BRIGHT! two clevis tabs and celeivs'. 4-grade 8 bolts. all wiring was done inside the tubing. wired so there are two switches. one for the inside two, and one for the outside two. All wiring included, everything included
Spent $180 on just metal
$200 obo
Fits 80-91 for sure. I am not positive about the newer because of the crumble zones.
I am in mankato, MN and it needs to be picked up, or meet up within reasonable distance.
I also have a good stock front bumper from my 88. Inlcudes the brackets, and two bumper bumpers
#13
79 400m engine and some parts...
I have a 79 F-250 with no axles and not much of the body worth saving. It does have a good 400m engine in it, and I just picked up a dual plane 4 bbl intake for it. (I couldn't resist that intake, even if I'm selling the thing) It's got a bad C-6 behind it. It was a 4x4 when I got it. I'm selling parts off it, so if you need anything, ask. I'd like to get $300/ BO for the engine, and will take offers for the other parts. Email me at rick90yj@yahoo.com and use 400M as the subject...located just north of Anoka, and I will deliver free within twenty miles.
(763) 753-6136 Rick Strassburg with questions
(763) 753-6136 Rick Strassburg with questions