I'll be the first. I need a radiator fan shroud for a 1980 F-150. V-8, 302, c-6 auto. I can supply radiator dimensions if needed

Dave

 

Hmm,
how about a bed mount roll bar for the same truck? Cheap and paintable, or cheap and chrome

DS

 

I havee...
1- 8pc set of *NEW* head bolts.
Ford p/n: F8dZ-6065-AA

****Motorcraft.com doesn't seem to want to run the Interchange search for me**
****They were originally acquired for a cyl. head problem on a '99 Ranger 3.0L FF**

Make An Offer!!

 

hey guys, got a 79 f100, 302 auto complete truck runs and drives great. no title. is my fatherinlaws truck and hes in a home. his ex girlfriend has the title but its in his name and he wont get it back. so its a no title deal and needs to be gone by the 26th or the county is gonna yank it. 300.00. the motor and tranny is worth that. id keep and part it but ive got 5 engines in the shop now and the wife says its gotta go. so...... my # is 803-600-1555 steve.

 

ive' got a 74 F100 with a 7.5 460 4bbl, motor''
i,m looking for a good 4bbl, carb'''
anybody got a good 4bbl, out there ????

 

Wanted: A factory blue air cleaner assembly for a 302 w/ 2 barrel carb. The big clunky one with the snorkel and pcv filter that was generally the first thing to be tossed from a truck.
Since my job has me on 6 10's a week I may have to do my parts hunting in here.lol

Dave

 

I've got:
302 engine dress up kit. Chrome valve covers (with breather cap) and 14" chrome air cleaner w/new filter element.
These things go for $50-$70 new. Make me an offer or trade

DS

 

Also have:
factory radio mounting bracket and radio bezel for 80-86 truck. May work on other years. The bezel is the woodgrain with "ranger" imprinted on it. Both in great shape

DS

 

I need 2 things:

both axle shafts (LH and RH inners and outers)for a 79 F250 with a D44.

the straps that hold the coil springs to the top of the spring pocket on a 79 F150 4x4. They are about 1" wide and 4" long.

Thanks
Kris Kizer- St George SC

 

For sale:
pretty much everything needed to take a lifted 80-86 F-150 v-8 4x4 back to a stock suspension.
I have:
2 new front factory coil springs
4 new factory shocks
2 factory radius arm brackets
factory IFS arm bracket
grade 8 nuts and bolts for r.a. brackets
new factory length rear u-bolts w/nuts
factory pitman arm

These items cost me about $300, but I'll take $250 for all. The stuff is brand new, except for the IFS bracket. Had to pull that from a yard.

 

I have a ton of 73-79 F100-F250 parts for sale. I have completely disassembled 7 or 8 trucks and want to get rid of some parts asap. I do not have any sheet metal (beds cabs doors hoods tailgates etc) for sale though. I also have: complete 360FE V8 with C6 trans, 360FE V8 missing some parts, NP208 transfercase with adapter to C6, D44 rear axle for 73-79 F100, Tilt column for 2wd truck, Complete cruise control set up, 78/79 grill swap parts, some 300-6 parts and some 460 parts, 4bbl carbs, a 300-6 efi upper and lower intake manifold and every other little nut bolt and doodad to completely rebuild a truck.

Also I have 2- 9' 6" homemade sneak boats with motors and livewell on a trailer that holds both boats. These were made with 3/8" marine grade plywood that cost $130 for a 4x10 sheet. They cost me over $1200 to build. My loss your gain.

Let me know what you need. No reasonable offer will be turned down. Buyer to pay for shipping or come get the item. Email me at STGCountryboy312 AT AOL DOT COM. All items can be viewed any day of the week.

 

lets also add a set of black steel headers (cant remember the brand)for a 302 in a 73-79 F150 2wd truck never bolted up. Id like to get $50 but I will entertain a serious offer

 

hi guys i am looking for a 1990 to a 1996 ford f150 4x4 with a blow engine or wrecked in the back. i wanna convert my dads truck to 4wheel drive. i do however want the transfer case to be a shifter instead of push button. any help would be apprecited o yea i need it to be standard cab lwb
thanks,
John T

 

I am looking for a 1973-1979 crewcab 2 wheel drive F250 or F350. I prefer one that is in really good shape. but i'll be interested in any condition. Thanks

 

I just replaced my instrument cluster with one that had a tach. The old one worked great and I hate to throw it away if anyone needs it. The speedo is out of the one I bought (137K ) I think. The clear faceplate has a blemish on the top left...3 by 1/4 inches.....I reused mine.
make me an offer I can't refuse......heheh