I Want One!!!!!
#1
#4
#7
I'm look'n for a Flathead V8 to replace the Flathead six I have in my 47 1/4 pickup. I live in colorado... would be willing to go and pick up the engine...and still willing to pay you, JD, How much are you wanting for it??? PM me with a price might be able to work something out....or I can be reached at bradley.d.west@us.army.mil
Brad
Brad
Trending Topics
#8
I have an engine for sale if you know of anyone looking.
Here is the info. that I got off the net, with the numbers that I entered. Is this information correct? What year is this engine?
239 CU. IN. FORD V8 (3.9L)
INTAKE: ECW9425-A
RED FORD: ("D" ROTATED 90 DEGREES WITH A CIRCLE AROUND IT) + 2
FIRING ORDER: 15486372
BLOCK: EBV6015C (1946-53)
48.L (CIRCLED)
Passenger Side Head - EBU6090 48E: FORD 16
Driver's Side Head - EBU6090 06V: FORD 11
Intake: 59V (I believe!)
There was a letter "B" over both number "9"s in the part number.
EBV is a 239 cu. in. V8 from a 1955 pickup and has small cam bearings.
ALL FORD BLOCKS HAVE 6015 in the block casting number.
Block identification number generally on side of block above oil filter for blocks cast at Cleveland.
I've been told that there are only 40,000 original miles on the engine. Can you help me determine what this engine really is?
Here is the info. that I got off the net, with the numbers that I entered. Is this information correct? What year is this engine?
239 CU. IN. FORD V8 (3.9L)
INTAKE: ECW9425-A
RED FORD: ("D" ROTATED 90 DEGREES WITH A CIRCLE AROUND IT) + 2
FIRING ORDER: 15486372
BLOCK: EBV6015C (1946-53)
48.L (CIRCLED)
Passenger Side Head - EBU6090 48E: FORD 16
Driver's Side Head - EBU6090 06V: FORD 11
Intake: 59V (I believe!)
There was a letter "B" over both number "9"s in the part number.
EBV is a 239 cu. in. V8 from a 1955 pickup and has small cam bearings.
ALL FORD BLOCKS HAVE 6015 in the block casting number.
Block identification number generally on side of block above oil filter for blocks cast at Cleveland.
I've been told that there are only 40,000 original miles on the engine. Can you help me determine what this engine really is?
#9
#10
the 8BA was produced from 49-53 in the states and from 49-54 in canada. Dont forget to look up here, we got lots of old trucks. I might be mistaken but didnt the 55 have a 272/292 y block? If its a flat head you prolly dont have the right heads for the block (up here in Canada its a bad problem) People always replace a head or two. Your best bet might be the numbers off the intake. Heres a link to check if its a flathead or not.
http://www.vanpeltsales.com/FH_web/f...53_239-255.htm
That is the firing order for a flatty tho.
http://www.vanpeltsales.com/FH_web/f...53_239-255.htm
That is the firing order for a flatty tho.
Thread
Thread Starter
Forum
Replies
Last Post
Worktrucks
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
15
02-02-2013 11:02 PM
Trulyvintage
1947 and Older Ford Trucks
3
05-20-2011 10:40 AM