Got another mud run this Saturday (April 28th)!! Gates open at 9 and the the trucks are ready to run! The whole crew will be there with the grill fired up and the Cam II flowing into the tanks.

They will be running 2 street classes (35" and under and 36" and up) where vehicles must be street leagal and have a valid registration. Then there will be the tire size classes (A= 33", B=36", C=40", and D=44"). And finally, the no restriction X class.

Directions:

From 95 S exit 118 Thornburg, Right on 606 follow to Left on (Smiling rocks) track on Right.

From 95 exit 130 culpepper, Left on Rt 20 S, Left on Rt 621 Mine Run Rd, Right on Rt 692 St. Just Rd, Left on Rt 606 3/4 mile, track on Left.

From I64 exit 124 Shadwell, Right on Rt 250 E, Left on Rt 22, will turn into Rt 231, Rt 15N, Right on Rt 20 N, Right on Rt 621 Mine Run Rd, Right on Rt 692 St. Just Rd, Left on Rt 606 3/4 mile, track on Left.


Hope to see everyone there!!!!

 

Ha! Not this weekend. . way way to much going on for awhile. This weekend is school projects to wrap up. . .next weekend is garden and then hopefully I can get my %^&$#@ front end welded together!!! Got the welder, just need the time. . .

Speaking of welding, do you do any transporting with your trailer for extra $$$ you know, just asking

 

OOPS! I got to pass this time. Birthday party. Relatives coming from out of state so I got's to be there.

Catch ya next time.

 

Steve,

As long as I don't have any planed events to run, have trailer, will travel...

Let me know and I'll see if I can help out!

Henry,

It'll be a long summer and I'll try to post events that we will be going to if you guys can make it out.

 

I will, oh yes I will

 

Well, for those that were at Bodatios and saw the 2 Fords that lost a wheel in the bog, it felt like I was there again, but this time it was me!!

Ran my "A" class (33") and did 90ft (placed 7th), ran my "B" class (36") with a 12 second full pull, ran my "C" class (40") and that's when it happened. I broke the driver side knuckle clean off at about 40' into the hole! I haven't even wanted to look at it to see how bad it is. I'm hoping it is just the knuckle and I'll replace that and the axle shaft (again!!) and be on my way. I'll get some pics of it in the current condition and post them up as soon as I can.

Next event for me is June 16th, so make plans to come out and have a great time!!

 

OK! June 16th. Marked down.

 

You'll have to remind later about that one, but I think I can make it

 

Got a chance to check the damage last night. Looks like I just popped the ball joints and, again, broke the axle shafts. I'll get the doner axle today and get the shafts out of it. This weekened I'll do all the repairs, nothing too major.