Need a good tuning shop in Arizona
#1
Need a good tuning shop in Arizona
Hey, I have a 1976 Ford F-150 with a 360 CID engine.
The engine is a freshly rebuilt longblock I bought and installed. I also installed a Mallory Hyfire 6A ignition, MSD 8mm plug wires, Mallory Promaster 29440 coil, new alternator and battery, new plugs, pretty much everything new. The carb is fairly new too, just rebuilt.
I pretty much just need a good place to tune it up for best possible performance with these parts. I want:
Timing tuned to optimal setting
Distributor re-curved
Possibly vacuum timing advance adjusted with an adjustable vacuum canister if necessary
Caburetor adjusted and re-jetted if necessary for best mixture
Idle speed and mixture adjusted
Does anyone know a really GOOD shop that can do all this and do it right? I have been burned in the past, had a shop try to tune my truck and it ended up worse than before! I want a shop that knows what they are doing, maybe one that will use a dyno to tune it, if necessary.
Any ideas? I'm in Mesa, Arizona but I can take it in the surrounding Phoenix / metro area, if the shop is good enough to be worth the drive
The engine is a freshly rebuilt longblock I bought and installed. I also installed a Mallory Hyfire 6A ignition, MSD 8mm plug wires, Mallory Promaster 29440 coil, new alternator and battery, new plugs, pretty much everything new. The carb is fairly new too, just rebuilt.
I pretty much just need a good place to tune it up for best possible performance with these parts. I want:
Timing tuned to optimal setting
Distributor re-curved
Possibly vacuum timing advance adjusted with an adjustable vacuum canister if necessary
Caburetor adjusted and re-jetted if necessary for best mixture
Idle speed and mixture adjusted
Does anyone know a really GOOD shop that can do all this and do it right? I have been burned in the past, had a shop try to tune my truck and it ended up worse than before! I want a shop that knows what they are doing, maybe one that will use a dyno to tune it, if necessary.
Any ideas? I'm in Mesa, Arizona but I can take it in the surrounding Phoenix / metro area, if the shop is good enough to be worth the drive
#2
Join Date: Dec 2005
Location: Chino Valley, Arizona
Posts: 9,275
Received 3,661 Likes
on
1,128 Posts
#4
Join Date: Dec 2005
Location: Chino Valley, Arizona
Posts: 9,275
Received 3,661 Likes
on
1,128 Posts
#5
Join Date: Dec 2005
Location: Chino Valley, Arizona
Posts: 9,275
Received 3,661 Likes
on
1,128 Posts
Hellbore
I went by lopers tonight they are still on Indian school at 908 E. Indian School. they were closed when I went by but I got their number off of the door 602-264-5288
Open Mon. through Fri 8:00 to 6:00 sat 8:30 to 5:00 I can't personally vouch for their maintenance but also I have never heard anything bad about them.
I went by lopers tonight they are still on Indian school at 908 E. Indian School. they were closed when I went by but I got their number off of the door 602-264-5288
Open Mon. through Fri 8:00 to 6:00 sat 8:30 to 5:00 I can't personally vouch for their maintenance but also I have never heard anything bad about them.
Thread
Thread Starter
Forum
Replies
Last Post
mike85120
1948 - 1956 F1, F100 & Larger F-Series Trucks
4
08-30-2014 10:39 PM
Bear47
1978 - 1996 Big Bronco
1
01-16-2007 06:04 AM