New muffler on 68 f100/ flowmaster
#2
New muffler on 68 f100/ flowmaster
What type of muffler would be the best for my truck. I have a 68 f100 360cid 2wd. I am looking at the flowmaster 40 series. There about $60 a piece, and i need 2. Also, do these mufflers actually increase horsepower and mpg. Basically i want that cool deep muffler sound. Any suggestions on how to do this cheap? thanks.
#3
New muffler on 68 f100/ flowmaster
I say go with the 60 series flowmaster with 2.5 inlet/2.5 outlet. I have this set up on my f100 with a 360FE and my f250 with a 302. On the 360 I'm running stock exhaust manifolds and it still sounds like a monster!!!! My 302 has headers, and man it sounds great!! I get excited everytime I start either of my pickups up. Want a nicer sound? Add a mild cam....LOUD + NOISY TRUCKS ARE MORE FUN!!! Ben
"Don't Laugh At This Truck Mister, Your Daughter Might Be In Here!!"
'78 F250 4x4/302/NP435/NP205
lifted/"35 mudders DUAL EXHAUST FLOWMASTERS
'78 F100 2wd/360/C-6/"9 inch
4bbl int+carb DUAL EXHAUST FLOWMASTERS
"Don't Laugh At This Truck Mister, Your Daughter Might Be In Here!!"
'78 F250 4x4/302/NP435/NP205
lifted/"35 mudders DUAL EXHAUST FLOWMASTERS
'78 F100 2wd/360/C-6/"9 inch
4bbl int+carb DUAL EXHAUST FLOWMASTERS
#4
New muffler on 68 f100/ flowmaster
Forgot to add....YES they give you a little more HP (15-30 over stock) and fuel mileage, due to the low backpressure. This also helps engine last longer. If you go ahead and invest in some headers while your at it, your more likely to notice a substantial increase in HP and mileage. I priced headers for my 360 at about $125 for a decent set, but never got around to buying them.
"Don't Laugh At This Truck Mister, Your Daughter Might Be In Here!!"
'78 F250 4x4/302/NP435/NP205
lifted/"35 mudders
'78 F100 2wd/360/C-6/"9 inch
4bbl int+carb
"Don't Laugh At This Truck Mister, Your Daughter Might Be In Here!!"
'78 F250 4x4/302/NP435/NP205
lifted/"35 mudders
'78 F100 2wd/360/C-6/"9 inch
4bbl int+carb
#5
New muffler on 68 f100/ flowmaster
I have a 77 F150. 460/C6. I run 2 45223 part numbers on mine. There are the 87-93 Mustang flowmasters. They are about the cheapest,due to volume sold) and sound great. I ran mine with manifolds and 2 1/4" aluminized pipe. I reciently added headers. This didn't really change the sound in the back, but you can hear the engine fire in the headers a little bit which sounds cool too.
Jimmy
Jimmy
Thread
Thread Starter
Forum
Replies
Last Post