9" Ford Posi Rear End???
#1
9" Ford Posi Rear End???
Greetings All:
Might anyone help me find a 9" Posi Rear End that will fit in a 65 Econoline Pickup?? This truck is being worked on in a local Youth Group Project and funds are kinda limited :-(( The kids want a 9" for the 302 they installed.
Any idea on how much a 9" posi can be bought for that will fit correctly??
Thanks for any help you may be able to give us. Located in Eastern Iowa.
Look forward to your replies.
Thanks again: Buff
Might anyone help me find a 9" Posi Rear End that will fit in a 65 Econoline Pickup?? This truck is being worked on in a local Youth Group Project and funds are kinda limited :-(( The kids want a 9" for the 302 they installed.
Any idea on how much a 9" posi can be bought for that will fit correctly??
Thanks for any help you may be able to give us. Located in Eastern Iowa.
Look forward to your replies.
Thanks again: Buff
#2
are you sure it doesn't have a 9" rear in it already? if it does then all you need is the posi unit and you can put it into your center section.
If it isn't a 9" rear you need to find out what the flange to flange length that you need is, andnext what type of suspension (I assume leafs but not sure on those) and either find one with the correct spring perches setup at the correct width or you can cut the spring perches off of one that has the right flange to flange wiedth and weld perches in place at the width you need them.
If it isn't a 9" rear you need to find out what the flange to flange length that you need is, andnext what type of suspension (I assume leafs but not sure on those) and either find one with the correct spring perches setup at the correct width or you can cut the spring perches off of one that has the right flange to flange wiedth and weld perches in place at the width you need them.
Thread
Thread Starter
Forum
Replies
Last Post
94E1504.9L
1968-Present E-Series Van/Cutaway/Chassis
5
02-06-2009 08:04 PM
Soldierboy
1948 - 1956 F1, F100 & Larger F-Series Trucks
7
10-07-2008 10:36 AM
bowturkey
Clutch, Transmission, Differential, Axle & Transfer Case
2
11-30-2003 09:56 PM
talldog
Clutch, Transmission, Differential, Axle & Transfer Case
3
07-02-2003 03:07 PM
Dusty McGuire
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
08-05-1999 07:52 PM