im having trouble locating a dana 44 ttb from an 80-96 f150/bronco for my 4x4 conversion. a parts truck with a working transfer case would be great or just the axle or transfer case. if you know of any in the south jersey area please let me know, i'd appreciate it.

 

Try any local bone yards...? Maybe try njfourwheelers website? They are out there. Let me ask you, why are you choosing this front end for your conversion? Im in Monmouth, let me know how far you are I can try to track some down for ya.

 

im located around the camden/cherry hill area. im choosing this front end for the ease of the conversion, its basically a bolt up operation, i think i may have tracked down a wrecked bronco at a local body shop, just waiting to hear back from the guy.

 

You might have to head out to PA junkyards to find one in worthwhile condition.

http://wegotused.com for example. That's usually where I get my larger parts.

The local yard by me in Rahway on occasion has parts like that, but they don't answer their damn phone so we have to run over there, and look under everything. Then hassle them to lift things out of the goo.

 

FF, have you considered just doing a sas? I mean your going through all of that work, you minus well make it worth it ya know. Get it out of a 250 or 350. good luck either way.

 

theres a big yard in toms river i just right now can't remember it's name .yellow pages.

 

Cosmos on rt#9 south in bayville. you can't miss it. look for the old Studebaker wrecker sitting about 30 ft up in the air on top of the building.

 

thats not the one, i'll have to call my old boss and ask. it's in the toms river area

 

I know someone who has one from a solid axle swap he did. i'm in new gretna. exit 52 off parkway. E mail me if interested

 

Well i justseen 1 on e-bay for sale!!!!

 

Shhh! I'm tryin' to make a sale here.

 

i have my truck laying around with a 44 in it. transfercase works just gotta replace the locking hubs on the axel. its all on the truck now. you can take it all. its an '85 shortbed 150

 

Hey guys I recently swapped my 1996 ford bronco sport to 2wd for my lightning project. I have alot of parts left over.
[list][*]stock 96 bronco hood with 1 foot long scratch across top. No dents can be repainted. Black $150[*]96 Transfer case works very little use $200[*]driveshaft rear $50[*]drive shaft front $40[*]rear leafs no sagging $70 pair[*]8.8 rear 3.55 gears no brake drum covers $100[*]complete front end coil springs, radius arms, axels works but need ball joints and possible universal on drivers side comes with warn premium manual hubs $200[*]2 catco high flow cats $40 each brandnew[*]96 302 bronco dash cluster works great 124,000 miles $70[*]4 oem 96 bronco sport rims alloy. Decent condition coating is deteriorating in some spots and might have a scuff or two on edges. $100 set of 4

1 brandnew bfgoodrich all terrain 31 10.5. 15 stock bronco tire $90[*]set of 6 eddelbrock ias shocks with about 7,000 miles on them. cost me $70 a piece 1 shock is brand new up front cause it blew $150 will sell rears pair for $50

Transfer case skid plate $30


all parts were on a 96 bronco with around 124,000 miles. All parts work. The suspension front end has surface rust but is from normal wear. I have pictures if you e-mail me at swatofcr@aol.com Parts are located in northern nj and pickup is prefered. I can ship but heavy items maybe a problem. I am not too up on the prices on here and can neogotiate. These are great parts for people that break there stuff every weekend off roading or need replacement parts. I swapped my bronco to 2wd and have no need for these. I am am honest sell and have a 187 positive feedback on ebay. I am in the military in nc and parts will be located at my moms house in nj. thanks


PICS
http://i31.photobucket.com/albums/c3...o96/006_20.jpg
http://i31.photobucket.com/albums/c3...co96/019_7.jpg
http://i31.photobucket.com/albums/c3...o96/008_18.jpg
http://i31.photobucket.com/albums/c3...o96/009_17.jpg
http://i31.photobucket.com/albums/c3...o96/010_16.jpg
http://i31.photobucket.com/albums/c3...o96/013_13.jpg