How does one remove the new radios in the 2005 F250's? They seem to lack the standard release holes that the older ones had.

 

do a search. someone posted a how to on this not too long ago. It was more involved than I would have guessed. IF you can't find the post PM me & I will send you a copy that I saved in a word doc.

 

Thanks - Or could you just cut and paste it from your word doc to here?

Again thanks

DD

 

You have to pry off the front facia around the radio/driver area/controls section. Start pulling it off on the driver side from the top and put your steering wheel all the way down. You have to pull off wiring harnesses as you go.

Thanks,
Chris

 

DoudD, I have a 2005 F250 and have the AM / FM radio only. Do you happen to be removing a CD player. If so, I would be interested in buying it. I hope it is OK to ask that on this forum. Johnw

 

You have to remove portions of the dash do a search and you can find it. If not email me and I will send you the details.

 

If you go to my gallery you can find a link to my website which has the .pdf. Just pull the dash off and unscrew the radio. Takes like 45min for a complete stereo install. I take mine apart all the time. Been upgrading my DDX 7015 since I bought in in Dec (nav, sirius, amp controller and such). You can also do a search from the main page.
...Rich

 

Thanks - I tried to go to your gallery but didn't see where you have one.

Ford should have just left the removal the way it has always been,,,

 

If you go to view public profile and look under contact info. My home page that is listed is my truck page. Since posting url's in here sometimes get's them cut off.
If not PM me.

...Rich

 

Great step-by-step.
Thanks.
That should be in the tech folder.

 

argann, great description. Your reference being able to use a 2004 F150 aftermarket radio plug. Do you have any information as to weather the F150 radio will fit in a 2005 F250. I see several cd players on ebay for the 2004 F150, but nothing for the F250. Your thoughts? John

 

Argann,
Nice job on the PDF file for dash removal. Do you know where I could find a wiring diagram for the stereo and speaker wires. I have a Pio AVIC-N1 installed and went to add some new speakers over the weekend and don't really know which one is pos. and neg. I heard you could go get an adapter to use the stock plug but I already cut them off so I might as well wire them to the speaker.

 

Here is where I got mine.
http://www.mobileworksaudio.com/guid...uck04radio.htm
Lee
----------------------
05 F-250 PSD CC

 

I'm a new member so I can't email yet. I need to know how to remove my single cd player to install a cd-6 player that I just bought off of ebay. Sounds like argann has a pdf file that would help. Can someone post a link?

Thanks,

Al

 

...Welcome to Ford Truck Enthusiasts!

This is an old thread …however stick around someone will be by shortly to answer your question.
We are happy you have chosen the best source for Fords!

Enjoy FTE....and
JOIN CLUB FTE -SUPPORT THE FORUMS!
…..See you on the boards.