Just curious if anybody knew what size this was?? Thanks in advance.

 

I believe it is 36mm

 

1 3/8 is the size of the fuel filter cap under the truck, I believe I used the same socket on my last oil change, not sure though...........

 

BTW, 33mm is the METRIC Equivelant to a 1 3/8 so its is the same socket size as the oil filter if I am corect.............

 

36MM, Six Point. Picked one up at Advanced Auto Parts for $8.

 

Have you been WELCOMED....OK then....WELCOME...take a minute to read the Guidelines....then enjoy FTE

 

Tim, Thanks for the welcome. I've read the "Read Before Posting Here" guidelines. Is this the guidelines you are referring too?

I've been a member of FTE since April 2004 and learned a lot from everyone here regarding the superduty and 6.0 PSD. A lot of knowledgable foks here! In fact I ordered one in April (Lariat/CC/4x4/6.0L) and took delivery in May. Love the truck!

Jeff

 

Mine is 36 mm

 

So is mine with 36MM metric.

 

Thanks for the responses - I knew 36mm was the size of the fuel filter....I was hoping Ford made the oil one the same - glad to see they did. Couldn't seem to find it anywhere in the manual tho.

 

doesnt the fuel filter also have a 3/8 ratchet hole thing?

 

Nope only 1/2 inch drive for the top engine fuel filter. 36MM under driver side frame.

 

Yes and very cool....this is the best site and the greatest bunch to hang out with.........sure we disagree, every so often....but all families do

 

See my instructions at http://home.austin.rr.com/sbv1/Proce...gEngineOil.htm It is a 36mm socket. Don't overtighten. 18 ft/lbs is specified.

 

I use 12 inch polish socket set, works great.