D20E Heads - 302
#3
well according to a book have it should look like this:
58 cc combustion chambers
1.78" intake valve
1.45" exhaust valve
port size intake 1.94" X 1.04"
............exhaust 1.24" X 1.00"
You could measure your ports and valves to see if they are the same as above, then you could be somewhat certain the cc is 58, but you should measure them to be certain. If you infact have the above heads, the ports are smaller than the 351w D0** eqivalent, just a thought, later
58 cc combustion chambers
1.78" intake valve
1.45" exhaust valve
port size intake 1.94" X 1.04"
............exhaust 1.24" X 1.00"
You could measure your ports and valves to see if they are the same as above, then you could be somewhat certain the cc is 58, but you should measure them to be certain. If you infact have the above heads, the ports are smaller than the 351w D0** eqivalent, just a thought, later
#4
Thread
Thread Starter
Forum
Replies
Last Post
77custom408
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
15
04-27-2017 07:55 AM
PRIMERED79 SHORT BED
1987 - 1996 F150 & Larger F-Series Trucks
0
04-03-2016 02:28 PM