57-60 Clutch/Brake pedal return spring
#1
57-60 Clutch/Brake pedal return spring
Guys,
I am looking to replace both my clutch and brake pedal return springs on my 57. Does anyone know where I can get these? I have tried a vendor (who will remain nameless) that did not indicate they were out of stock but after several emails finally told me they were on a long back order. Even if you have ones that will work as they do not have to be original. Here is a picture of mine:
I am looking to replace both my clutch and brake pedal return springs on my 57. Does anyone know where I can get these? I have tried a vendor (who will remain nameless) that did not indicate they were out of stock but after several emails finally told me they were on a long back order. Even if you have ones that will work as they do not have to be original. Here is a picture of mine:
#2
2) TAAE-9737-A .. Brake & Clutch Pedal Retracting Springs / 4.05" long -34 coils .88" diameter / Obsolete
Applications: 1957/63 F100/1100 / 1964 F100/700 / No FoMoCo Dealer or obsolete parts vendor has any, because...
In 1967, Ford replaced this spring and others with 'universal fitz-all' springs that came with two long extensions with a loop on one end, that could be cut to fit.
There were four different types of these springs, each one had a different tension...these were also used as carb linkage retracting springs.
The same universal springs can be bought in autoparts stores.
Thread
Thread Starter
Forum
Replies
Last Post
fordf348
1948 - 1956 F1, F100 & Larger F-Series Trucks
5
12-16-2014 03:41 PM
jamesadams
1948 - 1956 F1, F100 & Larger F-Series Trucks
3
05-19-2012 03:52 PM
50f-1
1948 - 1956 F1, F100 & Larger F-Series Trucks
3
02-20-2008 09:51 AM