9/15/2013 Ride Of The Week
#1
9/15/2013 Ride Of The Week
68murc's 1968 M100 out of Val Caron, Ontario, Canada
More pics here: 1968 Mercury M100 4x2 - '68 MERC
Congratulations Chris!
More pics here: 1968 Mercury M100 4x2 - '68 MERC
Congratulations Chris!
Last edited by SteveBricks; 09-15-2013 at 08:25 PM.
#3
Nice! Congratulations on the win.
__________________
Torklift International – Towing, Suspension, Tie Downs, Steps
Call me direct: 1-800-246-8132
Visit our Blog: http://www.torklift.com/blog
Torklift International – Towing, Suspension, Tie Downs, Steps
Call me direct: 1-800-246-8132
Visit our Blog: http://www.torklift.com/blog
#7
Beautiful bed floor, what kind of wood?
What kind of wood and finish on the bed floor?
68murc's 1968 M100 out of Val Caron, Ontario, Canada
More pics here: 1968 Mercury M100 4x2 - '68 MERC
Congratulations Chris!
More pics here: 1968 Mercury M100 4x2 - '68 MERC
Congratulations Chris!
Trending Topics
#8
You directed that question to Steve, but I don't think he'll be able to answer the question since it's not his truck, and I don't see where the info is listed in 68murc's gallery (the owner of the truck). So I sent a PM to the owner and asked him to check out this thread and hopefully he will respond to your question.
Stewart
Stewart
#10
Sorry fellas, I forgot to check in. Thanks for all the kind words, it was nice to see my girl get recognized as the beauty that she is.
The bed floor is made of 1" Pine planks screwed to a sheet of 3/4" plywood. It's HEAVY!!! The screws are counter sunk and the holes filled with wood filler. I think it's just Urethane on the Pine. Dad made the floor for me back in '98. It still looks great. If I remember correctly it cost less than $100 to make at the time.
The bed floor is made of 1" Pine planks screwed to a sheet of 3/4" plywood. It's HEAVY!!! The screws are counter sunk and the holes filled with wood filler. I think it's just Urethane on the Pine. Dad made the floor for me back in '98. It still looks great. If I remember correctly it cost less than $100 to make at the time.
#12
#15
Thread
Thread Starter
Forum
Replies
Last Post