70 f100 / police crown vic conversion
#1
70 f100 / police crown vic conversion
I am new to this site so please be gentle.
I am converting an 03 police crown vic to my 70 f100 short bed. Looks ez enough with the help of sites like this and youtube. I am going to put both front and rear end of crown vic into the truck.
I have a question about wheels and tires. I was told that Mustang wheels 05 and newer will work. Does that mean 05-09 or can I use 10-13 also? if I can, why does the ebay helper say that '10 will not work on '06 mustang. Also, what size rims are best for this application? 17"? 18"? Is there a size tire that would be recommended?
I know that doing conversion it lowers the truck a bit and I do not want to have low profile tires. Not looking to slam it. I want to fill the hole and make it look good.
Any help would be great. Thanks in advance.
I am converting an 03 police crown vic to my 70 f100 short bed. Looks ez enough with the help of sites like this and youtube. I am going to put both front and rear end of crown vic into the truck.
I have a question about wheels and tires. I was told that Mustang wheels 05 and newer will work. Does that mean 05-09 or can I use 10-13 also? if I can, why does the ebay helper say that '10 will not work on '06 mustang. Also, what size rims are best for this application? 17"? 18"? Is there a size tire that would be recommended?
I know that doing conversion it lowers the truck a bit and I do not want to have low profile tires. Not looking to slam it. I want to fill the hole and make it look good.
Any help would be great. Thanks in advance.
#2
I am new to this site so please be gentle.
I am converting an 03 police crown vic to my 70 f100 short bed. Looks ez enough with the help of sites like this and youtube. I am going to put both front and rear end of crown vic into the truck.
I have a question about wheels and tires. I was told that Mustang wheels 05 and newer will work. Does that mean 05-09 or can I use 10-13 also? if I can, why does the ebay helper say that '10 will not work on '06 mustang. Also, what size rims are best for this application? 17"? 18"? Is there a size tire that would be recommended?
I know that doing conversion it lowers the truck a bit and I do not want to have low profile tires. Not looking to slam it. I want to fill the hole and make it look good.
Any help would be great. Thanks in advance.
I am converting an 03 police crown vic to my 70 f100 short bed. Looks ez enough with the help of sites like this and youtube. I am going to put both front and rear end of crown vic into the truck.
I have a question about wheels and tires. I was told that Mustang wheels 05 and newer will work. Does that mean 05-09 or can I use 10-13 also? if I can, why does the ebay helper say that '10 will not work on '06 mustang. Also, what size rims are best for this application? 17"? 18"? Is there a size tire that would be recommended?
I know that doing conversion it lowers the truck a bit and I do not want to have low profile tires. Not looking to slam it. I want to fill the hole and make it look good.
Any help would be great. Thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post
lilorbie
1967 - 1972 F-100 & Larger F-Series Trucks
21
01-30-2022 10:15 AM
snomopaul
1967 - 1972 F-100 & Larger F-Series Trucks
20
06-14-2013 09:14 PM
davidmoss1992
1967 - 1972 F-100 & Larger F-Series Trucks
53
07-27-2012 06:30 PM
Kellokee317
1967 - 1972 F-100 & Larger F-Series Trucks
1
07-21-2008 10:07 AM