When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
picked it up from a friend, wouldnt drain water from the get go, so I bought a new pump and motor, yeah I took the drain line off and made sure it was clear and everything in the bottom of the washer is clear to the pump
Maybe transmission isn't moving the drain opener far enough to really open it.... ot a piece of trash from the macerator is not letting it open.....you'll have to pull the pump and that U tube off to see if anything is in there.....chicken bone????
lol i wish it would have been that easy, had the pump off and everything else off nothing is blocking anything, im gona try to flip the conections and see
I'm telling ya, appliancejunk.com, just put the make model what it's doing they'll help you, I've fixed my washer couple times,dryer couple times dishwasher and range. most of the times they'll even give you the part # you need.
I ended up figuring it out, after looking at the pump and clapper valve, I moved some of the drain and feed lines around and It works. It doesnt look right the way they are going but its pumping.