Carb Help
#1
Carb Help
I picked up a 1959 F100 at auction a few weeks back. Getting it home, discovered the previous owner had stripped it, and started installing a '79 302 V8 Widndsor, minus all externals (alternator, solenoid, fan, carb, etc).
I checked and found out a Motorcraft 2150 should be fine, and grabbed one at the salvage yard (with exchange policy just in case).
The issue is, I cannot figure out what rebuild kit to grab for it. The ID on the tag is
D9TF-BTB-C9F15
If someone could send me in the right direction for a good decoder, or somewhere else on the carb besides the tag to better ID it, that would be fantastic.
Thanks,
James H
I checked and found out a Motorcraft 2150 should be fine, and grabbed one at the salvage yard (with exchange policy just in case).
The issue is, I cannot figure out what rebuild kit to grab for it. The ID on the tag is
D9TF-BTB-C9F15
If someone could send me in the right direction for a good decoder, or somewhere else on the carb besides the tag to better ID it, that would be fantastic.
Thanks,
James H
#2
#3
Thread
Thread Starter
Forum
Replies
Last Post
bnradams
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
3
10-18-2009 12:58 PM