What does STC stand for and where is it located.

 

STC=Snap To Connect

Its a Fitting that attaches the HPOP to the HPO Standpipes

Its on the HPOP they crack and leak usually cause a no start

on the 05+ HPOP

ACRONYMS FORD

https://www.ford-trucks.com/forums/821641-acronyms.html

 

ok so I would have to pull my HPOP to see them?

 

You have to pull the pump to change the fitting but you can see it with the HPOP cover removed. The '03's and early '04's don't have one.

Updated fitting installed on the HPOP.


STC kit from Ford:


Here is a good video on the procedure:
http://www.youtube.com/watch?v=UuTKD...e_gdata_player

 

Blade & Bismic, thank you for this little link. I have been reading things on here for years and just fumbled by or googled it. I am going to add this to my "6.0 File"!

 

Thanks for all the info

 

I just want his torque wrench..... I like the beep.... real handy.... that and it switches between inch-lbs and foot-lbs..... I like....

 

Funney you mention that I am turning my computer into a 6.0L closer and closer everyday LOL

I can only imagine all the info mark has

Probably time for me to make a thumb drive copy of all this info I have saved If I had a computer crash I would never recover it all or find some of the info again

 

Lol.... I noticed and said the same thing til I thought I could see the "Snapon" writing on the wrench... Then it just turned into an impossible wet dream!