EGR code p1335
#1
EGR code p1335
hey guys my truck just threw P1335 and p0404. I pulled the EGR valve to check it and it is dry and sooty not sticky. I noticed a chunk missing from the o ring. Would this be a possible reason for throwing the code?
Its a new o ring as i cleaned the valve about 2000 miles ago and the valve was still relatively clean. The cel came on when I was driving, truck would only idle when accelerating after about 5 seconds of this all the sudden it would kick blow a puff of white smoke and then act normal, its done this about 3 times now since the light came on. thanks
Its a new o ring as i cleaned the valve about 2000 miles ago and the valve was still relatively clean. The cel came on when I was driving, truck would only idle when accelerating after about 5 seconds of this all the sudden it would kick blow a puff of white smoke and then act normal, its done this about 3 times now since the light came on. thanks
#2
#3
#4
They do have Oring kits with all sizes in it But you will want one that can withstand high exhaust temps. Everytime I get an assortment of orings trying to find specific size there all close but none work.
IMO if you can get the specific Orings pulled upin there computer then you should be good to go If not doubt the assortment kit will work for you
#6
Thread
Thread Starter
Forum
Replies
Last Post
clevelandtundra
6.0L Power Stroke Diesel
7
03-11-2013 10:33 AM
2006powerstroke90
6.0L Power Stroke Diesel
12
11-21-2010 12:28 PM