79 ford f100 6bt swap
#1
79 ford f100 6bt swap
okey i have been thinkin about this project for awhile and have been all ovr lookin at pics and how to do it. But would rather make a post and get all the information at once. what do i all have to do to make the 6bt fit in this truck i understand the suspension and drive train need to be upgraded. but where can i get motor mounts that will mount right up to this frame without making them and what tranny should i run prefer auto that can take a beating that aint 1000 to buy at a salvage yard but a 5 speed is okey. and how much other parts for the drive train will i need
#2
This thread might help you some...
Welcome to FTE, thornton32. I'll give a link to a similar build. I hope this helps you.
https://www.ford-trucks.com/forums/1...ins-build.html
I've been keeping track of that build for the past few days.
Enjoy, KBJ
https://www.ford-trucks.com/forums/1...ins-build.html
I've been keeping track of that build for the past few days.
Enjoy, KBJ
#4
No problem. I'm glad to help you out. If you start this build please start a thread here documenting all the things you did to the truck (hopefully with pictures) during the build.
Last edited by KingBigJoe; 03-07-2012 at 08:32 PM. Reason: I made a slight error.
#6
#7
Count me in for the buildup. There's a pair of good writeups by two different guys on FSB - and I think both double posted the threads here on FTE. Look up the build threads by gos and AmericanThunder over on FSB and here.
Both did very clean, thorough writeups on how they pulled it off. gos' is on a newer chassis, though. AmericanThunder did his on a dentside, so that might be more appropriate for your experience.
Both did very clean, thorough writeups on how they pulled it off. gos' is on a newer chassis, though. AmericanThunder did his on a dentside, so that might be more appropriate for your experience.
Trending Topics
#8
Desided to go with the 7.3 idi got a good deal on a 93 with 105000 on it but my 79 is having problems it has a 360 in it with a c6 auto tranny but I thought the solinoid was junk so i replaced it then it ran now i was goin to put aftermarket radio in to find out my radio harness is cut up an dnt kno wat wires r wat but the main problem is when I go to start it nothing not even a noise from starter or solinoid an nothing works dash lights or running light or wipers fuses r all good Idk wat to do an if u can help can you upload a pic of the radio wires an Wats a as battery wire thanx
#9
#11
#14
Thread
Thread Starter
Forum
Replies
Last Post
masterhummer
1948 - 1956 F1, F100 & Larger F-Series Trucks
2
12-15-2003 08:50 AM