Does anyone know where you can buy the back panels that the tail lights on a 1960 ford f100 styleside mount into? They are severely damaged and need replaced or repaired. Is there any way to get them off of the truck or do I need to cut welds?

 

I believe you'll need to cut them off. I've seen NOS sets come up for sale on eBay only a few times over the last few years.They don't last long.AKAIK,they're not reproduced.

 

Did'ja know (prolly not) that there are two different types of these quarter panel (bedside) extensions?

B7C-9928058-A Right & B7C-9928059-A Left .. Quarter Panel Extensions / Obsolete

Applications: 1957/60 F100 110" wheelbase / 1961/63 F100 114" wheelbase.
-------------------------------------------------------------------------
B7C-9928058-B Right & B7C-9928059-B Left .. Quarter Panel Extenions ~ With groove under tail lamp hole / Obsolete

Applications: 1957/60 F100/350 with 118" & 135" (F350 only) wheelbases / 1961/66 F100/350 with 120" & 122" & 132" (F350 only) wheelbases.
------------------------------------------------------------------------------------------------------------------------------------------
Did'ja know (prolly not) that there are two different types of taillamp lenses and bodies? With or without turn signals is the difference.

Did'ja know that the 1957/60 Styleside Beds are called the "wrong bed" by some people? Its bed lines do not match up to the cab lines on 1961/66's.

 

Thanks for the info, Bill.

You listed one set for the 57-60 110"(short) Wheel Base.Surely,they'll fit the long(118") wheelbase?Are they in fact the same exact parts,with two different numbers?

When those have come up on eBay,they're gone in a heartbeat.

 

There is a guy on the 57-60 facebook page that is apparently going to be reproducing them soon.

Scott

 

I wonder how much he'll be wanting for em? I could use a couple of em too. Mine are dented and the corners are rusted out.

 

Do tell facebook huumm...... the bottoms are always rusted out on the ones around these parts. I have yet to find any that are solid..

 

Join the facebook page and check it out, gets way more traffic than this forum (unfortunately IMO)

http://www.facebook.com/groups/57to60fords/

http://www.facebook.com/photo.php?fb...type=1&theater

Scott

 

The parts and part numbers are not the same, the B's have the groove under lamp hole. Dunno if they fit or not and don't call me Shirley.