Hi all,

I was just at the FORD website doing some research on the 6.2L for the SuperDuty line.

Ok...here is what I got for HP and Torque numbers...

HP:
385 @ 5500 rmp (6.2L V8 under 10K GVWR)

--OR--

316 @ 4179 rpm (6.2L V8 over 10K GVWR)

<-------->

Torque:
405 @ 4500 rpm (6.2L V8 under 10K GVWR)

-- OR --

397 @ 4179 rpm (6.2L V8 over 10K GVWR)

<--------------------->

So...question...what is the difference with the 6.2L in the SuperDuty? Do they or do they not have a different tune based on GVWR???

Can someone please confirm...


biz

 

No difference in them. There have been a few threads on this. The ratings are at different RPMs for the F-250 versus the F-350. The actual output is the same regardless of which truck it's in. The only thing that's different is the RPMs at which each is rated.

 

...Awesome Thanks! I figured as such...but wanted confirmation they didn't actually have a different tune.


biz

 

No problem.

Actually, here is a thread about it including one member's dyno chart:

https://www.ford-trucks.com/forums/1...er-rating.html

And if you're really in a reading mood, here's the thread about the 6.2 when we had Mike Harrison from Ford on the forums for a while to answer questions about the engine:

https://www.ford-trucks.com/forums/9...as-engine.html