Pre bent brake lines?
#1
Pre bent brake lines?
well... My truck has been quite the A**hole lately. first it was the vacuum pump. Then three days after that the alternator decided it didnt like the batteries any more. got that fixed. then last night i step out on the front porch to have a smoke and notice my exhaust hanging, No big deal right? I wanted to do exhaust anyway cause the P.O. did a serious hack job under there. So I pulled remaining pieces off so it didnt hurt anything while i collected parts. and heres the kicker! I jump in the thing this morning to come to work... fire it up... push the brake to put it in reverse and it goes right to the floor!!! hop under the truck and sure enough the brake line is rotted out right at the hose in the rear. so on to may question. sorry for the rant.
do you guys know where I can buy pre bent good quality OEM like brake line? or even good quality material to make my own? I have a lot of experience with the auto supermarket flavor brake line and here in michigan with the salt they only last a couple years. Maybe a Stainless one?
Thanks in advance all...
do you guys know where I can buy pre bent good quality OEM like brake line? or even good quality material to make my own? I have a lot of experience with the auto supermarket flavor brake line and here in michigan with the salt they only last a couple years. Maybe a Stainless one?
Thanks in advance all...
#2
#3
#4
This is were I got my stainless. They were very exact and worked well. Worth not bending my own. I got my hoses off Rock Auto. I have an extra rear hose if you are intrested.
Inline tube - Online Catalog - Ford
Inline tube - Online Catalog - Ford
#5
This is were I got my stainless. They were very exact and worked well. Worth not bending my own. I got my hoses off Rock Auto. I have an extra rear hose if you are intrested.
Inline tube - Online Catalog - Ford
Inline tube - Online Catalog - Ford
I have always bent my own lines from bulk tubing but this time a bought a stainless set from Inline tube I also bought a set of stainless trans cooler lines, I will be putting them on in the next few days. I wish Ford would build them with stainless lines from the start.
#7
Trending Topics
#8
#9
Thread
Thread Starter
Forum
Replies
Last Post
Dancingchicken
Brakes, Steering, Suspension, Tires, & Wheels
9
07-03-2009 11:07 PM
mechmagcn
1948 - 1956 F1, F100 & Larger F-Series Trucks
4
02-07-2007 01:07 PM
davidsca
Brakes, Steering, Suspension, Tires, & Wheels
2
05-13-2006 11:44 PM
GammaDriver
1987 - 1996 F150 & Larger F-Series Trucks
4
12-28-2001 12:36 PM