Cummins Swap
#1
Cummins Swap
I was looking at swaping in a 5.9l cummins into a 74' F250 High boy and i was wondering if any one of yall had done this at all and had a list of parts needed for the swap I plan on buying a junked truck to pull the engine and wiring and ect... I planned on mating it to a E4OD tranny with the adapter plate on the engine to be able to use a standard bell housing.
Any input would be greatly appriecated.
And before I get any brand name haters Ford does use cummins the the larger trucks as an option.
Any input would be greatly appriecated.
And before I get any brand name haters Ford does use cummins the the larger trucks as an option.
#2
#5
There are several cummins swaps going on in the engine swaps section here Engine Swaps - Ford Truck Enthusiasts Forums
I have a 93' industrial 5.9 bought direct from cummins. Finding a complete donor vehicle is an easier solution.
I have a 93' industrial 5.9 bought direct from cummins. Finding a complete donor vehicle is an easier solution.
#6
#7
Trending Topics
#8
#9
A stock E4OD will handle a stock Cummins without a problem.
It can be upgraded to handle 1,000 ft pounds.
Lots of info on these sites:
http://www.4btswaps.com/
Dodge Cummins Diesel Forum
Destroked or Ford Cummins will have the parts you need.
It can be upgraded to handle 1,000 ft pounds.
Lots of info on these sites:
http://www.4btswaps.com/
Dodge Cummins Diesel Forum
Destroked or Ford Cummins will have the parts you need.
Thread
Thread Starter
Forum
Replies
Last Post
Shmit90051
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
31
05-22-2019 09:11 PM
mark460
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
34
01-13-2010 07:48 PM