<a href="http://s111.photobucket.com/albums/n144/rjd75/?action=view&amp;current=Mississauga-20110601-00099.jpg" target="_blank"><img src="http://i111.photobucket.com/albums/n144/rjd75/Mississauga-20110601-00099.jpg" border="0" alt="Photobucket"></a>

Doing a 3 point turn against a curb and miscalculated by a hair.. Anyone know where I can get a new wheel cheap? I have seen used, replica and what appear to be repaired wheels but no deals on new ones. Would prefer new oem so that I know it's safe and straight.

 

I have one that looks like this too

I would check out EBay.........

 

I have 4 that look like this! Rotating might help the tires but it didn't help the rims. I searched and gave up. Not going to pay upwards of $200 to have 5+ like this. I found an alternative though.....Just don't stop. You can't see it when the wheels are moving!

 

Are just the covers available? I have one that looks like that I did last week....really pissed me off. Ebay sellers want $300-$500 for ONE use wheel/cover. RIPOFF!

 

After I bought mine, I noticed one wheel has a slight rub on it...
Its amazing how much money they go for on ebay...I wonder what a new one is.

The cladding is sealed onto the wheel, there's no replacing it.

 

Check Craigslist in your area. You just might find one...............Bob

 

Check Car-Part.com--Used Auto Parts Market too...

 

Got the same problem. Can you just change the wheel cover or do you have to buy a new whee?. At least with alloy wheels you can repair damage like that.

 

I did that to one of mine. I only hit the cover though and the wheels itself was untouched. I got a small section of 2x4 and beat it the bent portion of cover back into shape. The chrome is still cracked a bit in the area, but you have to look hard to notice it now.

 

wife nailed the drivers front cladding while I was deployed. the steel is straight, but the cladding is tore up and FUGLY

For the price of 1 rim, I can almost buy a set of new rims. I think I'm going to pick up some take-off 22" F-150 Harley rims (2008 style) and get new rubber.

 

Where are you located? I have two in the OKC area

 

I had three wheels that looked like the OP's. The cost of replacing the factory wheels made it easy to talk the wife into the aftermarket wheels I wanted. Used ones that are scuffed up look like they are going for about $300 and up on Ebay. I did see some new take offs (less than 10 miles) with a buy it now of $485 plus $40 shipping. Too much (IMO) for factory wheels.