Reverse wire location
#1
#3
Looks to be a black wire with a pink tracer, but it's not on the column.
Here's a wiring diagram for the 2002:
http://www.e-toolbox.com/ads/wiring/va153488.pdf
Pop
Here's a wiring diagram for the 2002:
http://www.e-toolbox.com/ads/wiring/va153488.pdf
Pop
#7
Trending Topics
#8
#9
#10
Trey,
Did you ever find the mysterious black/pink wire under the dash?
I too am seeking the location of this wire inside the cab.
Unfortunately, I don't believe I can defeat my reverse sensor as the radio I purchased shuts off the bluetooth phone feature when the backup camera is active.
Did you ever find the mysterious black/pink wire under the dash?
I too am seeking the location of this wire inside the cab.
Unfortunately, I don't believe I can defeat my reverse sensor as the radio I purchased shuts off the bluetooth phone feature when the backup camera is active.
#12
Thanks for the pictures.
I spent a few minutes under the steering column and found a group of wires coming out of the wheel shroud that included a black wire with a pink stripe. The wires terminate into a brown plug.
I've attached two pictures - one for perspective and one closer up.
Assuming I found the correct wire, I hope this helps others.
I'll confirm that I located the correct black/pink wire when the camera arrives and I start my install.
I spent a few minutes under the steering column and found a group of wires coming out of the wheel shroud that included a black wire with a pink stripe. The wires terminate into a brown plug.
I've attached two pictures - one for perspective and one closer up.
Assuming I found the correct wire, I hope this helps others.
I'll confirm that I located the correct black/pink wire when the camera arrives and I start my install.
#14
#15
I took power for the reverse lights and ground off of the 7 pin trailer harness back by the bumper. Then I ran the positive wire up along the frame rail with my A/V cable in a wire loom to signal the radio when the truck was in reverse. Little extra wire but I was running the A/V wire anyway and I didn't have to worry about tapping in under the dash. I made the camera only powered when the truck was in reverse. I know some guys might like it hot all the time or on a switch to be able to power it so they can see behind them while they are driving with trailers and such.