parting out five 73-79 fords
I am currently parting out five 73-79 fords. 2wd and 4wd 1/2 ton and 3/4 tons.No dana 60 front ends.I have also accumulated many many parts for these years over the past 25 years.I also have an ex cab - cab rust free.Let me know what you need. Thanks B.K.
|
I'm looking for a pair of the covers for the seatbelt retractors and finger cups for door panels.
|
I'm interested in a wiring harness thats in decent shape. I have a 75 F100 that will be getting a 390 shortly and the wiring harness in the truck is hacked up and broken.
|
im looking for a 1979 f150 pitman arm,front inner splash shields,4spd shifter boot,glove box insert,ash tray and track,reverse light sockets,a pair of horns.thanks
|
I'm looking for a good emergency brake pedal assembly for my '74 f100.
|
Am looking for a complete 73 grille to include headlights turn signals buckets etc... mine on my 73 was replaced with a 78/79 square headlight one and it irks me every time I look at it
|
Looking for a manual trans tilting steering column
|
Any Jr Western mirrors? i believe they are the U-shaped 2 mount style
|
I'm looking for a good intact set of door panels, blue or black; also looking for a good turn signal assembly. PM with price if you have any please
|
I need hood springs for a 79.
|
How much do you want for the bed i have a 79 f150 i also need both doors
|
need a header panel for a bed. also looking for mint blue dash pad and headliner for reg cab.
|
Yes I need both hood springs and I need the right rear leaf spring rear mount and pivot shackle. How much for parts and delivery to Charlotte NC? I'll can pay via PayPal
|
part out transfer case or you trying to sell them whole?
|
I need the motor mount towers that come of the frame for a 302. 1978 f150.
|
manual block plate
Hi kingBee,I need manual block plate for 351m motor/400,,doing the 460 swap dave lafermedavidm@aol.com
|
Location
Was wondering where you are located at too see if local pickup is an option? I am located in PA. Rebuilding my 79 F150,looking for a box w/ tailgate and much more.
|
well I see lot's of requests but no answers back...anyone ever hear from this guy?
|
I have wait on him to get back a hold of me
|
I have purchased from Kingbee a # of times,Bruce is good people:-X22 BK is in Missouri
|
Looking for power steering to convert my 1965 F100
|
Do you have a pair of type 7 side mirrors?
Thanks |
16 inch steel five lug stock wheels. Full set. Shipped to 95973. Thanks!
|
I need a rust free drivers door. I am in northwest Arkansas.
|
I'm looking for an automatic steering column.
Rob |
Need the a/c evaporator box under the passenger side dash do you have one?
|
Looking for mirrors. Look at post #13 in this thread and let me know what styles you have:
https://www.ford-trucks.com/forums/8...questions.html |
Have any closed knuckle Dana 44 hubs?
|
How about cab marker lights from the roof of the F250 (w/harness)?
|
Do u have any 1977 1/2- 1979 3/4 4x4 power steering components? Mainly need gear and pitman arm for highboy conversion.
Thanks, Neal |
Hello I need a steering wheel and head light buckets for a 77
Let me know how much shipped to Detroit. Thanks |
Hey nhurst I do have what you need and could send you some pics. if you have an alternate e-mail address. Just let me know. Thank You B.K.
|
|
Looking for re-buildable 400 engine core. Thanks!
|
Looking for a full set of spring hangers for a 79 f250 super cab. rear and front springs. Would also like a price on the rust free super cab if you still have it.
Thanks. |
I'm looking for a F-150/Bronco Stock Pitman arm. Any luck you might have one? How much? powerstroker99dually at yahoo.com or PM me here
|
Looking for seats thanks
|
77 parts
Im looking for a set of 5 lug rims, a bench seat in decent condition, a 351m, 400, 429, or 460 engine and door panels for 1977 f150 custom. also location if pick up is avalible or possibility of parts being shipped or delivered Thanks
|
parts
hey big blue How do I contact you ?Do you have an alternate e-mail address? I have every thing you had ask about. Let me know. Thank You B.K.
|
looking for 73-79 factory push bar
|
All times are GMT -5. The time now is 10:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands