|
I will have to get some pictures later, I have some but the dogs tore the material off and ill just get new ones. I know that the bar on the bottom that lets the track adjust is bent. Easy fix. I will get the pics and send them to you. What is your email?
|
Thanks for getting some pics here is my email ian at jgsales.com at=@
|
Hi.
How much for the 48-52 gas tank (not full of rust) ? Can you deliver to Mexico? |
30.00 sounds fine!
She left you a note on the Visitors Message on your profile. |
I have a 52 that I'm restoring so can you plzz let me know what you have for my project?
|
What do you need. I have a lot of parts. Just make a wish list!
|
Can you send me a contact number so I can give u a call?
|
765-635-3830
|
I am looking for a right front fender for a 53-54 F1. Also a gravel pan for a 53. I would be interested in both front fenders if in good shape. Also need the V8 badge on the front grill of a 53. Does not have to be in great shape. Plan on buffing it down and painting it to match the truck. Have any of this stuff? If so can you send pics to HondaValkyrie at comcast dot net. Thanks, Rick
|
Do you still have the "f1 front axles"? If so, what are they off of? I am looking for an axle from 1948-52. The f1 designation probably answers the question, but I am new to the old Ford truck hobby. I just bought a 47 1 Ton.
|
Originally Posted by fifty-two_f1
(Post 10371291)
I also have an 8BA flathead V8 that is complete. I pulled the heads to check for cracks and could not find any. I used 400 grit in between the valves and cylinder walls where they like to crack but did not see anything. It is not stuck. It is standard bore. It had clean oil in it. It came out of a 1950 truck. I have an extra set of heads and an extra crank for it. It needs to go. I also have a 226 flat 6 block and a 215 6 that is stuck. MAKE ME AN OFFER!!!
Thank You :-X0A6 |
how much for the seat and where are you at?
|
Do you still have an original '51 F1 bench seat available? If so, how much?
|
Yes, I would like to get 100 dollars for it. If you want to see some pictures, give me your email.
|
maters_1951Fordf1 at yahoo dot com
thanks! |
Originally Posted by fifty-two_f1
(Post 10583090)
Here are some more parts I need to get rid of.
All are from a 54 f250. deluxe heater - complete ash tray glove box door pedal assembly steering column electric wipers transmission cover cowl vent assembly battery cover Make me an offer on this stuff. It is still together in the cab so if you want the whole thing let me know. |
yes i do, would you like some pictures? if so give me your email.
|
I am in need of a cowl vent cover for my 49 cab...
|
I do have some. Make me an offer on one. If you want pictures let me know.
|
Do you have original dome light in your truck if so could you send picture to ac13387@dslextreme.com
I have a lead on one but I don't know what it looks like |
dome light
mine did not have one
|
Please send a picture of the seat to wagsdecloux@execulink.com also do you have the ashtray too still? Also a pic of a cowl cover...Thanx
|
'53 "Fang" grille
I am looking for the "Fang" grille insert for the '53 model F1. Do you happen to have one in decent condition?
|
"Fang" grille correction
My wife informed me that HER truck is a '54 not a '53. :) So would you happen to have the "fang" grille for a '54 F1 that is good shape?
|
Hi,
Do you still have the two speed axle and springs for the 49 F6 for sale?? Thank You and have a great day, Chicken1 |
http://i855.photobucket.com/albums/a...1/DSC00280.jpg
http://i855.photobucket.com/albums/a...1/DSC00279.jpg Here are some pictures of the rear end. It came out of a 49 f6. |
Originally Posted by canadian_diesel1964
(Post 11276026)
Please send a picture of the seat to wagsdecloux@execulink.com also do you have the ashtray too still? Also a pic of a cowl cover...Thanx
I sent an email with pictures. Sorry for the delay. |
parts for sale
I'm looking for a pass side inner fender for 1951 f1 please email at namrogd@hotmail.com to let me know
|
Inside rear view mirror for sale
2 Attachment(s)
This item has been SOLD. Thanks for your interest.
This is an anti-glare mirror that I took off my 1950 F2. http://shop.ebay.com/merchant/petemcl3 |
Hi there,
Sorry it has taken me a while to get back to you on the axle. Is it still available?? If so, how much do you want for it?? |
petemcl,
Do you still have the anti glare mirror for sale?? |
Yes, I still have the rear axle. Make me an offer on it.
|
Originally Posted by chicken1
(Post 11576491)
petemcl,
Do you still have the anti glare mirror for sale?? |
Hey there 52-F1...
48-50 Seat still available? I'm also looking for big truck front lower fenders for a F-2 thru F-6. Do you have the drums from the F-6 front axle and if so do you know what the bores are ? |
Originally Posted by fifty-two_f1
(Post 10370279)
Summer is rolling around and im cleaning house! I have tripped over these parts too many times. I would love to see someone use them instead of me taking them to the scrapper. Here is the list-
1949 f6 two speed rear axle with springs 2-48-52 f5 f6 front axles 1955 f600 electric two speed 1950 f4 rear axle with 4 14 inch rims 1950 f4 front axle with 2 14 inch rims 2 f1 front axles a bunch of 20 in split rims a grain cylinder hoist and pump WORKS i was using it last year ***Please make me an offer on this stuff. I am not wanting a fortune at least scrap price. I would love to see someone get some use out of it. Space is getting tight. I also have- 2 48-52 bench seats (no rust) 1954 complete cab sitting on an f250 frame with 8ft bed (some rust in the front corners, doors are nice excellent top very fixable) 2 stubby running boards 48-52 (rust free) 1 48-52 gas tank (not full of rust) 1 3 speed floor shift (nice inside) a lot of 4 speed non synchronized parts 48-52 inner fenders 1 48-52 ash tray 1 53-55 ash tray 1 56 ash tray I have a bunch of other stuff if you do not see what you need PM me. How much for the floor shift 3 speed trans? Is it in good shape - I need one to replace the original one in my 1950 ford F1. Email me what your asking price is for the 3 speed transmission at forrbw@aol.com. Thanks, Bill |
looking for a drive shaft for a 1949 f1 with a for speed.
|
Can you give me a measurement so I can check what I have?
|
If you still have the magic air emblem what year is it for? Thanks
|
I have reproduction 1951 emblems. they will fit the 52s but is correct for the 51s.
|
how 'bout a passenger-side window regulator?
|
| All times are GMT -5. The time now is 01:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands