Do you have the dome light components for a 1950 - 1951 F2. They are the parts not available on LMCTrucks cateloge page 90?
|
do you have any 1950 - 1951 F2 dome lights? Like the one shown on page 90 of the LMC Truck catelogue?
|
i dont, but give me a few dys and let me look. i have some stuff boxed up and will look and see. midwest early ford parts has new ones for 53-56 fords. classic haulers has the correct dome lens gasket for you. as far as i know, no one is reproducing it yet for the 48-50. also, go on hamb ( honky ass message board)website and register free and put out a request. this has been the best information site i have ever been on. hope
this helps, mark over the hill gang purveyor of vintage hot rods 678-713-6220 cartersville,ga. |
Looking for a front bed panel.....
|
mark thanks for your reply. it was very helpful.
|
I have a front bed panel that came out of a 49 f1. It will need some hammer work. It is at my grandfathers place at the moment so I cannot send pictures, but let me know if you want them.
Originally Posted by MiaKid22
(Post 10560336)
Looking for a front bed panel.....
|
1952 f-1
I need a set of running board for my truck. How long are the short running board? If they work I would want a set please contact me.
|
They will work. they used them on the f1s when they put stake beds on them. I will have the get the measurements for you.
|
Okay, I found a set and measured them. They are about 38 1/2 inches long if you measure at the back of the running board (not the dogleg that goes around the fender) It is about 15 inches deep at the front and about 10 inches deep in the rear. The set I have does have the correct mounting brackets on them.
Originally Posted by apsbbuck
(Post 10583028)
I need a set of running board for my truck. How long are the short running board? If they work I would want a set please contact me.
|
Here are some more parts I need to get rid of.
All are from a 54 f250. deluxe heater - complete ash tray glove box door pedal assembly steering column electric wipers transmission cover cowl vent assembly battery cover Make me an offer on this stuff. It is still together in the cab so if you want the whole thing let me know. |
Give me a call with how much? 612-219-6191
|
I still have a good 48-52 bench seat and a 53-55 bench seat.
|
Originally Posted by fifty-two_f1
(Post 10635978)
I still have a good 48-52 bench seat and a 53-55 bench seat.
Thanks |
does anyone have a tailgate for a 1948 f2
|
Any 16" original wheels for a 1950 f1?
|
All times are GMT -5. The time now is 11:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands